Menu Features And Functions - LENCO LED-2618 BLACK Operating Instructions Manual

Colour television with remote control

Hide thumbs

Table Of Contents

Table of Contents

For your viewing requirements, you can set the related mode option. Picture mode

Mode

can be set to one of these options: Cinema ,Game , Dynamic, Sport and Natural .

Contrast

Sets the lightness and darkness values of the screen.

Brightness

Sets the brightness value for the screen.

Sharpness

Sets the sharpness value for the objects displayed on the screen.

Colour

Sets the colour value, adjusting the colors.

To set Power Save Mode as Eco, Picture Off and Disabled. See the section,

Power Save

"Environmental Information" in this manual for further information on Power Save

Mode

Mode.

This setting controls the backlight level and it can be set to Auto, Maximum,

Backlight

Minimum and Eco Mode. Backlight function will be inactive if Power Save Mode

(optional)

is set to On. Backlight cannot be activated in VGA, Media Browser mode or while

the picture mode is set to Game.

If the broadcast signal is weak and the picture is noisy, use Noise Reduction setting

Noise

to reduce the noise amount. Noise Reduction can be set to one of these options:

Reduction

Low, Medium, High or Off.

Dynamic

You can change contrast rate by using dynamic contrast function. Dynamic contrast can

Contrast

be set to one of these options: Low, Medium, High or Off.

Colour Temp

Sets the desired colour tone.

Picture Zoom

Sets the picture size to Auto,16:9, Subtitle,14:9, 14:9 Zoom, 4:3 or Cinema.

HDMI True

While watching from HDMI source, this feature will be visible in the Picture

Black(optional)

Settings menu. You can use this feature to enhance blackness in the picture.

Films are recorded at a different number of frames per second to normal television

Film Mode

programmes. Turn this feature on when you are watching ﬁ lms to see the fast motion

(optional)

scenes clearly.

Skin Tone

Adjust the desired skin tone.

Colour Shift

Adjust the desired colour tone.

Press OK button to edit RGB gain. You can conﬁ gure the colour temperature values

RGB Gain

using the RGB Gain feature.

Reset

Resets the picture settings to factory default settings.

Autoposition

Automatically optimizes the display. Press OK to optimize.

(in PC mode)

H Position (in

This item shifts the image horizontally to right hand side or left hand side of the screen.

PC mode)

V Position (in

This item shifts the image vertically towards the top or bottom of the screen.

PC mode)

Dot Clock (in

Dot Clock adjustments correct the interference that appear as vertical banding in dot

PC mode)

intensive presentations like spreadsheets or paragraphs or text in smaller fonts.

Depending on the resolution and scan frequency that you input to the TV set, you

Phase (in PC

may see a hazy or noisy picture on the screen. In such a case you can use this item

mode)

to get a clear picture by trial and error method.

While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added

to the Picture Settings while in PC mode.

02_MB80_ [GB]_1825UK_DVBT_C_S2_26132LED_BRONZE23_10079022_50218879_basic IB.indd 25