Do you have a question about the PlasmaWave WACP150 and is the answer not in the manual?
Questions and answers
Summary of Contents for FreshHome PlasmaWave WACP150
Page 1
To Buy: Visit www.sylvane.com or call (800) 934-9194 For Product Support: Contact Winix at (847) 551-9900 Made in Korea Contact Us WINIX USA 120 Prairie lake Road. Unit E East Dundee, Illinois 60118 www.winixinc.com E-Mail : info@winixinc.com Tel : +1.847.551.9900 WINIX Europe 14 cours de I’Intendance, 33000 Bordeaux, France For more information www.winixeu.com E-Mail : info@winixeu.com...
TABLE OF CONTENTS LIMITED PRODUCT WARRANTY Warranty WINIX FRESHOME AIR CLEANERS LIMITED WARRANTY Limited Warranty: Winix warrants the parts of the machine to be free of defects in material and Package Contents workmanship and provides service and support for one (1) year from the date of purchase by the Instructions original consumer for model WACP150, and (3) years from the date of purchase by the consumer for models WACP300 and WACP450.
INSTRUCTIONS WARNING:SAFETY INSTRUCTIONS ▶ Warning Power WARNING / NOTICE DIRECTION DO connect the power cord DO unplug air cleaner when DON'T plug power cord to only proper power outlet not in use to save energy into loose or damaged WARNING PROHIBITED with a ground connection.
Page 4
▶ ▶ Note Note Power Operation DON'T disconnect the DON'T unplug the power DO unplug the unit and DON'T strike or drop the air cleaner. DON'T allow children to play on or near power cord during cord before air cleaner has contact your service dealer the air cleaner.
SAFETY INSTRUCTIONS PRODUCT SPECIFICATIONS Thank you for purchasing a Winix air cleaner. Please read this manual carefully before using. This Model WACP150 WACP300 WACP450 product is for household use only. Room Size 150 sq. ft. 300 sq. ft. 450 sq. ft. Power Supply AC 120V/60(Hz) AC 120V/60(Hz)
AIR CLEANER FEATURES AIR CLEANER SET-UP CAUTION: Fully assemble air filter before using (See Air Cleaner Set-Up on following page). Set-Up Procedure Note: Features vary according to model. 1. Remove protective film from the control panel. 2. Remove the front panel by pulling gently ❶...
CONTROL PANEL FILTER REPLACEMENT A. AIR QUALITY SENSOR: Automatically monitors the air quality level and adjusts fan speed Filter Replacement CAUTION: Do not wash and reuse the accordingly in Auto. There are two separate filters: True HEPA Filter or the Carbon Pre-Filter B.
REMOTE CONTROL BATTERY REPLACEMENT CAUTION: Turn off the air clearner and 1. Squeeze tabs of battery cover and at the unplug the electrical cord before same time pull cover out of remote. ❷ performing any maintenance. 2. Insert battery as shown and close battery cover.
TROUBLESHOOTING OCCURRENCE POSSIBLE CAUSE / SOLUTION Before You call Solutions to Common Problems The air quality light is Before you call for service, review the list below. This list covers problems that are not the result green, but there is still Replace the filters as needed.
Page 10
OCCURRENCE POSSIBLE CAUSE / SOLUTION Clear the sensor with a vacuum cleaner, as it may be blocked or The unit is running on clogged. high all the time. - Sometimes a compressed can of air may unclog the dust in the sensor.
Need help?
Do you have a question about the PlasmaWave WACP150 and is the answer not in the manual?
Questions and answers