Operating instructions (English) To operate this appliance properly and safely read the following instructions carefully. 1.1 Introduction This appliance, model HW 10, is a simple When you push the on/off switch the water boiler. The cold water is poured water will heat. The signal-lamp in the into the kettle by hand.
Page 4
1.2 Warning! For safe operation of the water boiler, pay 7. Never immerse the appliance in close attention to the following points: water. 1. When the appliance Is In operation, 8. Make sure that all repairs are carried some components will get very hot. out by qualified technicians.
Page 5
Keep the following instructions in mind when installing a new plug: − The yellow-green core (earth) must be connected to the terminal marked with the letter E or the earth symbol ( ) or coloured green or yellow-green. − The blue core (neutral) must be con- nected to the terminal marked with the letter N or coloured black.
Page 6
1.5 Maintenance 7. Now replace the plug in the socket, ARNING switch on the appliance and wait ca. Always stay with the appliance during maintenance tasks (such as descaling or 10 minutes. 8. Then replace the funnel in the kettle cleaning) and keep the instructions given in the Introduction (points 4 through 9 and and fill up to ca.
Need help?
Do you have a question about the HW10 and is the answer not in the manual?
Questions and answers