Page 1
CR-158 COUPON PRINTER MANUAL InnoPrint Limited assume no responsibility for errors, omissions, or damages resulting from the use of information contained within this manual.
InnoPrint Limited or its Authorized Reseller, and extending for the length of time stipulated by InnoPrint Limited. A list of InnoPrint Limited offices can be found in every section of this manual set. If the product proves defective within the applicable warranty period, InnoPrint Limited will repair or replace the product.
CR-158 Coupon Printer Manual INTRODUCTION Purpose of this document The purpose of this document is to aid in the set-up of, and software integration for the InnoPrint CR-158 Printer. CONNECTING THE PRINTER The printer has three available connections, either via the 7 pin connector, USB or RJ45 socket.
CR-158 Coupon Printer Manual 2.2 USB Data Connection The USB connection is used to host a COM port on a connected PC, allowing the device to be communicated with through the SSP protocol. Information on this protocol can be found in a separate document (Innovative Technology manual GA138.) SSP can be used to configure and control the device, as well as to download...
CR-158 Coupon Printer Manual TECHNICAL SPECIFICATIONS CR-158 DC Voltage Minimum Nominal Maximum Absolute limits 11 V 12 V 26 V Supply ripple voltage 0.5 V @ 100 Hz Supply Current Standby 100 mA Printing Peak 4.8 A Interface Logic Levels...
CR-158 Coupon Printer Manual Environment Parameter Max (Design Guide) Operating +5°C +60°C temperature (Ambient) Humidity 95% Non Condensing FIELD SERVICE Inserting A New Roll Of Paper To insert a new roll of paper, remove the roll mandrel from the printer, insert into the roll core and place into the holder on the printer so the paper comes off the role and into the printer mechanism as shown in the below images.
CR-158 Coupon Printer Manual Removing The Print Head Roller Assembly The print head roller assembly can easily be removed to allow easy access for cleaning and removal of jammed paper. Firstly remove the paper guide, as detailed in 6.2, then pull the release handle in the direction shown in the picture. This will also release the paper from the mechanism.
CREATING TEMPLATES & TESTING 7.1 Ticket Template Manager To fully maximise the potential of the CR-158 printer and its printing capabilities, and to test the unit fully, we recommend you install Ticket Template Manager. Ticket Template Manager is a software tool that allows users to create and edit ticket/receipt designs, and upload them to InnoPrint printer products.
Need help?
Do you have a question about the CR-158 and is the answer not in the manual?
Questions and answers