TP-Link TL-WPA4230P User Manual page 26

WPA/WPA2 - Select WPA/WPA2 based on Radius Server.


Version - You can select one of following versions.
 Automatic - Select WPA or WPA2 automatically based on the wireless station's capability
and request.
 WPA - Wi-Fi Protected Access.
 WPA2 - WPA version 2.

Encryption - You can select either Automatic, TKIP or AES.

Radius Server IP - Enter the IP address of the Radius Server.

Radius Port - Enter the port used by radius service.

Radius Password - Enter the password for the Radius Server.

Group Key Update Period - Specify the group key update interval in seconds. The value can
be either 0 or at least 30. Enter 0 to disable the update.
WEP - Select 802.11 WEP security.


Type - You can select one of following types.
 Automatic - Select Shared Key or Open System authentication type automatically based
on the wireless station's capability and request.
Shared Key - Select 802.11 Shared Key authentication type.

 Open System - Select 802.11 Open System authentication type.

WEP Key Format - You can select ASCII or Hexadecimal format. ASCII format stands for any
combination of keyboard characters in the specified length. Hexadecimal format stands for any
combination of hexadecimal digits (0-9, a-f, A-F) in the specified length.

WEP Key - Select which of the four keys will be used and enter the matching WEP key
information for your network in the selected key radio button. These values must be identical on
all wireless stations in your network.
TL-WPA4230P AV500 Passthrough Powerline WiFi Extender
Figure 3-12 WPA/WPA2
Figure 3-13 WEP
17