Boss D12F Manual

12” (30cm) flat subwoofer

Enlarged version

Technical Support

Congratulations on your purchase of the Boss Audio Phantom Series

If you need technical support with your Boss Audio product or have

Subwoofer. Boss Audio takes great pride in producing products that

questions about its use, please contact us:

look great, sound great, and stand up to the daily rigors applied by

805.751.4853

audio enthusiasts around the world.

www.BossAudio.com

*Due to ongoing product development, specifications are subject to change without notice.

D12F_1114_v2

Table of Contents

Do you have a question about the D12F and is the answer not in the manual?

Page 1 Technical Support Congratulations on your purchase of the Boss Audio Phantom Series If you need technical support with your Boss Audio product or have Subwoofer. Boss Audio takes great pride in producing products that questions about its use, please contact us: look great, sound great, and stand up to the daily rigors applied by 805.751.4853...
Page 2 Enclosure The D12F is optimized for operation in a sealed enclosure. Since the woofer has pole-vent, it needs a minimum clearance from the rear wall of the enclosure of 0.75” (19 mm). Below you will find the dimensions to make the enclosure to suit the subwoofers needs, it has been designed for maximum output while retaining great sound quality.
Page 3 Wiring your Subwoofer Product Specifications 4 Ω Impedance 4 Ω Resonant Frequency 35 Hz 0.691 5.398 0.793 2.055 cu ft. (58.19 liters) Xmax Sensitivity (1 W/ 1 m) 87 dB Peak Power Handling 1000 W Mounting Depth 3-7/8” (98 mm) Cutout Diameter 11-1/8”...