3.1 Operation key [CAL] key [UNITS] key [TARE] key [ZERO] key 3.2 Display 3.2.1 6 digit 0.56-inch LCD or 6 digit 0.4-inch LED display 3.2.2 LCD display with backlight 3.2.3 Indicating Cursor Cursor Description →0← Appears when the weight is within + 0.25e (initial zero setting range) Appears when AC power is used Appears when DC power is droved by storage battery Appears when taring is effective and there is a tare value in storage...
5. Use Guide 5.1 Do not use under the environment of heavy dusty and high vibration. 5.2 Place the article in the center of the platter as far as possible. 5.3 Never use high corrosive solvents to clean it. 5.4 Do not weigh overload, weight (tare included) can't exceed its Max. Capacity plus 9d ("d"...
6.3 Tare Place the load on platter, press [TARE], the scale will display"0", and the cursor on "T" appears: If press [TARE] again, it will return to the original tare value and at the same time, the cursor will disappear. If removing the load, the scale display a negative value, press [TARE] again, "0"...