1. Manuals
  2. Brands
  3. Gamma Scale Manuals
  4. Scales
  5. GMC-306
  6. Operation manual

Gamma Scale GMC-306 Operation Manual

Digital counting scale
Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

GMC-306/315/330 Digital Counting Scale
Operation Manual
Version 2.1
Gamma Scale
Tel: (905) 455-8333
Fax: (905) 455-0658
E-mail: info@gammascale.com
Website: www.gammascale.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GMC-306 and is the answer not in the manual?

Questions and answers

Related Manuals for Gamma Scale GMC-306

Summary of Contents for Gamma Scale GMC-306

  • Page 1 GMC-306/315/330 Digital Counting Scale Operation Manual Version 2.1 Gamma Scale Tel: (905) 455-8333 Fax: (905) 455-0658 E-mail: info@gammascale.com Website: www.gammascale.com...
  • Page 2 CONTENTS 1. Parameters and Specification 2. Operation Keys and Functions 3. Operation Procedure 4. RS232C Output 5. Use Guide 6. Battery Maintenance(Option) 1. Parameters and Specification 1.1 Accuracy class: OIML III 1.2 Internal resolution ration: 500000 1.3 External resolution ration: 30000 1.4 Relative humidity: <= 90% RH (no condensation) 1.5 Display: 6 digit 0.56-inches LED 1.6 Power supply: AC adaptor of 9V 800mA, C+;...

  • Page 3: Operation Procedure

    2.2 COUNT SET When the weight of the goods is not known, used to confirm the numbers of sampling, see Item 3.6 for details. 2.3 TOTAL DISPLAY Used for displaying the accumulated times and numbers, see 3.8.2 for details. 2.4 MEMORY CLEAR Cooperating with other keys to clear accumulated times and numbers, see Item 3.8.3 for details.
  • Page 4 3.3 Tare When the goods are placed on scale platform and it the weight is regarded as tare to deduct. Press TARE, the window will display 0. 3.4 Fixed number call 3.4.1 If you need to set the fixed number call, the operating steps are as follows: input the fixed number, then press FIXED NUMBER CALL key.
  • Page 5 There are two ways for clearing the input value: 3.7.1 You can directly press SETEUP CLEAR to clear the value you have just input. 3.7.2 Input new value in five seconds after the last value is input and the original setup will automatically be changed.
  • Page 6 I -digit decimal 2-digit decimal 0.00 3-digit decimal 0.000 4-digit decimal 0.0000 State B: Unit and weighing mode control character (D7 refers to verification bit) D7 Verification bit D6 0 D5 1 D4 1 D3 Dynamic mark bit D3--0, stability; D3=1, non-stability (dynamic) D2 Overload mark bit D2--O, normality;...

This manual is also suitable for:

Gmc-315Gmc-330

Table of Contents