Reposition Ebl And Vrm - Lowrance LRA-1000 Instruction Manual

3. Press ↓ to call up the EBL-VRM menu. Select the last EBL-VRM op-
tion and press
the screen, then press
This is a zoomed in view from the previous image, clearly showing the
radar target, Variable Range Marker and Electronic Bearing Line.
To reposition EBL and VRM:
1. Press ↓ to launch the EBL-VRM selection menu.
2. Select the EBL-VRM you want to reposition and press
3. Use ↑ ↓, ← → to move the EBL and VRM to the desired location.
Press .
ENT
4. If you have more than one EBL-VRM on the radar display, repeat
these steps to reposition each EBL-VRM on the display.
. Press ↑|→ to make the VRM and EBL visible on
ENT
.
ENT
Variable
Range
Marker
Radar
Target
Electronic
Bearing
Line
34
.
ENT