Krell Industries KPS 28c Instructions For Use Manual page 2

KPS 28c
Compact Disc Player
with Krell CAST Technology
v 01.0
This product complies with the EMC directive (89/336/EEC) and the low-voltage directive (73/23/EEC).
WARNINGS
The KPS 28c must be placed on a firm, level surface where it is not exposed to dripping or splashing.
The ventilation grids on the top of the KPS 28c must be unobstructed at all times during operation. Do not
place flammable material above or beneath the component.
Do not remove or bypass the ground pin on the end of the AC cord. This could cause radio frequency inter-
ference (RFI) to be introduced into your playback system. Operate the KPS 28c only with the power cord
supplied.
Turn off all systems' power before connecting the KPS 28c to any component. Make sure all cable termina-
tions are of the highest quality, free from frayed ends, short circuits, or cold solder joints.
THERE ARE NO USER SERVICEABLE PARTS INSIDE ANY KRELL PRODUCT.
Please contact your authorized Krell dealer, distributor, or Krell if you have any questions not addressed in
this reference manual.
®
equipped
This product is manufactured in the United States of America. Krell
Industries, Inc., its subsidiaries, and authorized agents. Krell Playback System™ is a trademark of Krell Industries, Inc. Krell CAST is a patent pending of
Krell Industries, Inc. Krell Link™ is a trademark of Krell Industries, Inc.
are either registered trademarks or trademarks of Pacific Microsonics, Inc. in the United States and/or other countries. HDCD system manufactured
under license from Pacific Microsonics, Inc. This product is covered by one or more of the following: In the USA: 5,479,168, 5,638,074, 5,640,161,
5,808,574, 5,838,274, 5,854,600, 5,864,311, 5,872,531, and in Australia: 669114. Other patents pending. TosLink™ is a trademark of Toshiba
Corporation. All other trademarks and tradenames are registered to their respective companies.
2000 by Krell Industries, Inc. All rights reserved
©
Krell Industries, Inc.
45 Connair Road
Orange, CT 06477-3650 USA
TEL 203-799-9954
FAX 203-891-2028
E-MAIL krell@krellonline.com
WEBSITE http://www.krellonline.com
is a registered trademark of Krell Industries, Inc., and is restricted for use by Krell
®
®
, HDCD ® , High Definition Compatible Digital ® and Pacific Microsonics™
P/N 304374