AOpen 1557 User Manual page 89

Error Messages
Parity Check 2 nnnn*
Press <F1> to resume, <F2>
to Setup, <F3> for previous
Run the I2O Configuration
Utility
If you still encounter problems after going through the corrective measures, please
contact your dealer or an authorized service center for assistance. Some problems
may be solved using the BIOS Setup Utility. See "BIOS Utility" on page 68.
Corrective Action
Parity error found in the I/O bus. BIOS attempts to
locate the address and display it on the screen. If it
cannot locate the address, it displays nnnn.
Displayed after any recoverable error message. Press
<F1> to start the boot process or <F2> to enter Setup
and change the settings. Press <F3> to display the
previous screen (usually an initialization error of an
Option ROM, i.e., an add-on card). Write down and
follow the information shown on the screen.
One or more unclaimed block storage devices have the
Configuration Request bit set in the LCT. Run an I2O
Configuration Utility (e.g. the SAC utility).
79