Kawai KCP90 Owner's Manual page 29

 Lower Split Point setting
This setting is used to change the point at which the lower and upper sections are divided, allowing the size of each section to be
increased or decreased freely.
* The default split point is set to G2.
Lower section Upper section
Default split point (G2)
When ACC is enabled:
Press and hold the ACC button for two seconds.
The LED indicator for the ACC button will start to fl ash.
Press the  or  MENU buttons until the Lower Split Point
setting screen is shown in the LCD display.
4. Lower Split Point
= G2
Press the  or  VALUE buttons or press a key on the keyboard
Method 1: Method 2:
to change the Lower Split Point setting.
Press the ACC button again to return to the Style screen.
* The adjusted Lower Split Point setting can be stored to the KCP90's
Registration memories. Please refer to page 22 for more information.
29