Sylvania SDVD5088 Instruction Manual page 11

1. Connect the DVD 5.1CH connections with Subwoofer 5.1CH Input.
2. Connect the Subwoofer 5.1CH Output with 5 speakers.
• Make sure the connections match the connecting jacks.
3. after correct and safe connection, to make sure the Setup is well done.
Press "Setup" in the remote control, Highlight "Audio", and make sure Bass management is "ON".
Bass Management : On
Front Speakers : Small
Center Speakers : Small
Surround Speakers : Small
Subwoofer
Test Tones
Center Delay
Surr. Delay
Digital Output
If no sound is heard from the Rear speakers and Center, make sure to switch to 5.1CH in
the back side of the Subwoofer.
When switch to 2.1CH in Subwoofer, there's only Front Right & Front left speakers work.
Don't Mix up the Subwoofer Input and Output, else, will be no sound.
Only adapted to 120V~60Hz.
: Present
: Off
: No Delay
: No Delay
: PCM