Table of Contents
Advertisement
Quick Links
Boss Water Systems
Australia
Reverse Osmosis System
Model – 021-5RM
Congratulations on your purchase of the
most advanced water purifier system
available!
Installation and Service Guide short web version,
this is not the instruction manual you will receive
with your purchase of a PSI-021-5RM but a
shortened version that is available on our web site,
it is a shorter version due to other suppliers likely to
copy this instruction manual as their own.
This reverse osmosis system is designed to have the strongest re-mineralising possible and longer
lasting compared to the in-line version, it's target is 7.0 pH so those looking for high alkaline water
this unit won't do it in standard form but the re-mineralising cartridge in this unit un-screws to
allow you to add some high alkaline media of your own like coral sand
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Boss 021-5RM boss water systems australia
Summary of Contents for Boss 021-5RM boss water systems australia
- Page 1 Boss Water Systems Australia Reverse Osmosis System Model – 021-5RM Congratulations on your purchase of the most advanced water purifier system available! Installation and Service Guide short web version, this is not the instruction manual you will receive with your purchase of a PSI-021-5RM but a...
- Page 2 REVERSE OSMOSIS WATER PURIFIERS Of all the water purifier system types on the market by far the most superior is the reverse osmosis process. Reverse osmosis works by forcing water through a membrane, if the water molecule is small enough it will pass across the membrane material and into the product line (pure water).
- Page 3 Caution This Reverse Osmosis system is designed for operation on microbiologically safe water which is usually Chlorinated mains water supplies, this system is not suitable for installation on Un-Chlorinated water supplies, contact your selling agent to have a UV steriliser added for microbiologically unsafe water such as Tank, Dam or Bore water. Pressurised Storage Tank Carbon Post Filter...
-
Page 4: Faucet Installation
Stage 3 This is the membrane which is the main filter in a reverse osmosis system, pore size is less than 0.0005 micron, the membrane is a thin film composite, NSF stand 42, 53 and 58, normal replacement is usually between 3 to 5 years. Stage 4 This is the re-mineralising cartridge which alkalises the water to as close to neutral pH (7.0) as possible, cartridge is usually replaced every 4 year. - Page 5 Determine desired location for the faucet on your sink surface. Place a piece of masking tape or duct tape on location where the hole is to be drilled. Mark the centre of the hole on the tape. Using a variable speed drill on the slowest speed, drill a 1/8” (3 mm) pilot hole at the centre of the desired location.
- Page 6 storage, the process of draining the tank twice is only done when the system is new or a new membrane is installed, this process expels the preservative. Flush valve maintenance. This unit is fitted with a membrane-flushing valve and is normally closed. About once a month Turn the Faucet on and drain the tank, at the same time turn the small red or blue valve at the front of the unit to the open position and leave it on for about 10 minutes to clear any possible build-up of particles, failure to do this will...
Need help?
Do you have a question about the 021-5RM boss water systems australia and is the answer not in the manual?
Questions and answers