Using Your Long Slot Toaster - Sunbeam TA4520 User Manual

Using your Long Slot Toaster

Plug the toaster into a 230-240 volt AC
power outlet and switch the power on.
Toasting Bread
1. Position the bread into the bread slot.
2. Select the desired browning setting using
the Electronic Browning Control.
Note: If toasting 1 slice (in the TA4520 Long
Slot 2 slice) or 2 slices (in the TA4540 Long
Slot 4 slice) it is recommended that you
use a lower browning setting to achieve your
required result and to prevent burning.
Important: Do not toast stale bread, rice
crackers or similar on a high setting as there
is a chance that they may catch fire.
3. Push the Toasting Lever down to
commence the toasting cycle.
4 4
5. When the desired browning is achieved,
the toaster will automatically stop toasting
and pop the toast up.
6. If you need to remove the toast before the
cycle is complete, press the Cancel button
on the left hand side of the toaster next to
the toasting lever. The Cancel button will
immediately interrupt the toasting cycle
and pop the toast up.
7. The QuickCheck feature enables you to
check on the progress of your toast without
interrupting the toasting cycle. Simply lift
up the toasting lever to view the toast and
then release when you have finished. if
the toast is ready press the Cancel button.
8. To remove small pieces of toast, crumpets
or bagels, use the High-lift Lever to lift the
toast above the starting position. This will
prevent burning your fingers as you remove
the toast.