Orchid Telecom CP100 User Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Conference Phone

CP100/CP200

User Manual

Table of Contents

Need help?

Do you have a question about the CP100 and is the answer not in the manual?

Questions and answers

Summary of Contents for Orchid Telecom CP100

Page 1 Conference Phone CP100/CP200 User Manual...
Page 2 Introduction …………………………………………………………………………….………… Installation Notes …………………………………………………………………….………… Dial Pad Layout ……..….…………………………………………………………….…..…….. System Setup …………………………………………………………………………………….. Setting the Date/Time ………………….……………………………………………………… Setting the Recall (Flash) Time ………………………………………………………..… Setting the LCD Brightness ………………………………………………………………… To set for PSTN or VOIP calls …………………..………………………………………..Dial a number in the Redial list …………………………………………………………...
Page 3 Thank you for choosing the Orchid Conference Phone CP100/CP200. Please take time to read through this user manual to get the most from your new purchase. Connect the long lead (6.5M) from the Power adaptor to the socket marked EXT on the underside of the CP100/200.
Page 4 1. Speaker 9. Dial keys 2. Near End microphone status LED 10. VOL + Button 3. Memo Key 11. Volume Status LED 4. Functional LED 12. VOL - Button 5. HOLD Button 13. MUTE Button 6. REDIAL Button 14. STORE Button 7.
Page 5 PBX services. Eg. To hold and transfer calls. The factory default setting is 100ms, if you are using the CP100 in another country or your PBX needs a longer Recall Flash time this can be increased. Press the mute button.
Page 6 Press the VOL+ button. (USB will flash on the display) Press the Mute button. Connect the USB cable to a USB port on the PC with Skype installed, the CP100 will install all necessary drivers on WinXP, Win2000, Vista and OSX.
Page 7 To call a number in the redial list press the VOL+ until the required number is displayed, then press the Redial button. The number will be dialer automatically. Up to 20 telephone numbers can be stored into memory, the memory locations are numbered 01 to 20.
Page 8 If you have a CP200, pressing the mute button will also switch off the 2 External microphones although the LED’s on the External microphones will remain Green. The Orchid CP100 will store the telephone numbers of the last 20 incoming calls. (Provided numbers have not been withheld) To check the caller list, press the VOL- key for each incoming telephone number.

This manual is also suitable for:

Cp200