Formatting Sd Card - ScoutGuard SG550 User Manual

HCO

3.1.2 Formatting SD Card

The system will delete all files stored in the SD card after formatting. You should make sure
that you have made a backup of important data.
1 In MENU, press the UP or DOWN key until the system enters into the format menu, as
shown in Fig. 6(a) and 6(1).
2 Press the OK key. The system will ask you to confirm, as shown in Fig. 6(b) and 6(2).
3 If you want to proceed the formatting process, press the RIGHT key to change the value
to 『YES』. 『YES』 will be highlighted, as shown in Fig. 6(c) and 6(3).
Press the OK key to start formatting the SD card. During formatting, the guide information will
be changed, as shown in Fig. 6(d) and 6(4).
(a)
(b)
(c)
3-Advanced Setting
(b)
(c)
Figure 5: Setting Camera Mode
Page 9
SG550/SG530
(2)
(3)
(1)
(2)
(3)