Getting The Best Sound; Cleaning And Care - Orbitsound SB60 airSOUND BASE Handbook

3

GETTING THE BEST SOUND

2 2
1
4
3
The airSOUND BASE is easy to set up and enjoy, but even better sound
may be achieved by following these easy steps:
Spatial Sound:
The spatial sound field is produced by the speakers in the sides of the
airSOUND BASE (2). These special signals interact with the main signal
(1) to produce spatial sound in your listening environment. Make sure
that the side grilles are free from obstacles.
The Subwoofer:
The integrated subwoofer (3) is down firing and produces powerful
bass. Make sure that loose objects are not able to rattle on the surface
near the airSOUND BASE. You can turn the Bass down with the remote
control to reduce the bass level.
To get the best bass performance, ensure that the bass port (4) is free
from obstruction, and it is at least 5cm away from the nearest wall.

CLEANING AND CARE

Use a soft, clean cloth moistened with plain, luke-warm water to
clean the exterior of the unit. Glass cleaner is a good way to remove
finger marks, but use it sparingly, and avoid contact with the actual
loudspeaker driver units.
IMPORTANT: Never use solvents such as benzene or other strong
chemical cleaners since these could damage the unit's finish. It is VERY
important that no liquid reaches the inside of the unit.