Setting Up Your Humidifier - Honeywell HWM705 Series User Manual

Warm mist humidifier
Table of Contents

Advertisement

Available languages

Available languages

HWM705 SERIES HUMIDIFIER COMPONENTS
How it Works:
The tank feeds water into the Heating Chamber where it is heated to a pure steam vapor.
The steam vapor mixes with dry air in the Cooling Chamber and is released in to the room
as soothing warm mist.
Medicine Cup
Mist Outlet
Cooling
Chamber Tab
Steam Outlet
Cooling
Chamber
Heating Chamber
Heating Element
Power Light
Power Knob
HWM705 SERIES ACCESSORIES
The following accessories work great with your humidifier.
These accessories can be purchased at most major retailers or through Kaz.com.
Protec Cleaning Cartridge,
PC-1BXN in U.S, or PC-1C in
Canada
Keeps your humidifier cleaner,
longer. Continuously cleans
and protects humidifiers
against bacteria and mold
2
for 30 days.
Removable Tray
Top Tank Handle
Lift Tab
Removable
Tray
Water Reservoir
Base
Kaz Inhalant, KFC-4 in U.S,
or Vicks VapoSteam,
VS177CANEA in Canada
Can be added to medicine
cup area to provide soothing
menthol vapors to help
provide comfort.

SETTING UP YOUR HUMIDIFIER

1. Remove humidifier and all contents from box. Save Use and Care Manual for future use.
Recycle packaging materials or save for storage.
Step 1
2. Remove twist tie from power cord and extend power cord full length. Do not operate with
power cord coiled or twist tie in place.
3-4. Ensure proper assembly. Make sure Cooling Chamber and
Removable Tray are securely in place and the Locking Tab is engaged.
Water Tank
5. Select a firm, level location at least 12" (30cm) from any walls.
Place the humidifier on a water-resistant surface.
Steam should be directed away from any walls, bedding or furniture.
Kaz will not accept responsibility for property damage caused by water spillage.
WARNING: KEEP OUT OF REACH OF CHILDREN AND PETS.
This product produces HOT STEAM and should be placed in an area not accessible to children
or pets. Ensure the power cord is also securely out of reach.
Bottom
Tank Handle
FILLING/REFILLING
RESET:
Locking Tab
When your humidifier is out of water the refill light will illuminate.
Turn off and unplug the humidifier, and wait 20-30 mins until unit
cools down.
Step 1
1. Remove Water Tank by grasping the Top Tank Handle and pulling up. Remove Tank Cap
located on bottom of Water Tank by turning counter clockwise.
2. Fill Water Tank with cool water. Do not fill with warm or hot water.
3. Replace Tank Cap by turning clockwise to lock back in place. Do not over tighten.
Place Water Tank back on humidifier Base and turn humidifier on.
NOTE: The Water Tank should be carried using two hands: one handing holding the Top Tank
Handle and the other holding the Bottom Tank Handle.
Step 2
Step 3
Step 2
Step 3
Step 4
Step 5
and
Refill Light
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents