Related Manuals for Ortech OD-100G
Summary of Contents for Ortech OD-100G
- Page 1 INSTRUCTION MANUAL FOR ORTECH FIREPLACE OD-100G / OD-100SS / OD-100D /OD-58 /OD-58D/ OD-100GWH www.ortechindustries.com...
-
Page 2: Quick Reference Guide
QUICK REFERENCE GUIDE Prior to installation, please ensure: The rated voltage of your firebox fits the output voltage of your outlet; The light bulbs in your firebox are in good condition. Please follow the instructions for replacing the light bulbs in the MAINTENANCE section The heater on your fireplace may emit a slight, harmless odor when first used. -
Page 3: Important Instructions
IMPORTANT INSTRUCTIONS WARNING You should read and always follow the important instructions below to reduce the risk of fire, electric shock, and injury to persons. 1. Read all instructions before using this fireplace. 2. This fireplace is hot when in use. To avoid burns, do not touch hot surfaces which are located near the heater outlet or light bulbs. -
Page 4: Installation
INSTALLATION This section provides step-by-step instructions for installation of your fireplace. WARNING The socket must be 15A/125V. 1. This fireplace is designed to be hung on solid walls or inserted into a wall hole after proper construction. Select a suitable location, which is not susceptible to moisture, or dust and is away from high traffic and things that may catch fire or block openings such as drapes, furniture, etc. -
Page 5: Operation
15A/125V 4. If there's no outlet near the desired location, install a new one near or behind mantel. WARNING Do not attempt to wire you own new outlets or circuits. To reduce the risk of fire, electric shock or injury to persons, always use a licensed electrician. 5. - Page 6 are off. When the heater is not in low-power status ( is dark), press <LOW> button will switch it to low-power status; when it's in low-power status ( is on), press <LOW> button to turn it off. Similarly, pressing <HIGH> button will switch the heater to high-power status ( will illuminate).
-
Page 7: Maintenance
Allow at least 5 minutes for light bulbs to cool off before touching bulbs to avoid burns. I. Bulb Requirements Quantity of 3 clear chandelier or candelabra bulbs with an E-12small socket base, rating voltage 125 volts, rating power 40 watts (OD-100G: 5 bulbs). CAUTION Do not exceed 40 watts per bulb II. - Page 8 To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They may be able to take this product for environmental safe recycling. Ortech Industries Inc Website:http://www.ortechindustries.com www.ortechindustries.com...