CONNECTING WITH A HUB (NOT INCLUDED)
Wireless Router
Connect a LAN cable to the router and the ETHERNET SWITCH on the back of
1
the HUB.
• If the product is already connected to the router by wire, disconnect the
LAN cable from the product and then connect the cable between the
hub and router.
• You can connect the LAN cable to any ETHERNET SWITCH port on the
HUB.
Attach the HUB's power cord to the power port on the rear of the HUB, and then
2
plug the power cord into an electrical outlet.
The power (
3
When the pairing indicator (
outlet.
If the HUB's pairing indicator does not flash, press the SPK ADD button on the
rear of the HUB.
• If you are adding multiple products, connect all the product's to electrical
outlets. If you are not connecting all the products, refer to pages
13~14.
Power
connection
DC 24V
LAN cable
) and the HUB (
) begins to flash, plug the product(s) into an
HUB
Power connection
) indicators on the HUB's front turn on.
15
CONNECTIONS