Summary of Contents for Skystar THUNDER-60S
- Page 1 PROFESSIONAL SHOW LIGHTING THUNDER-60S LED MOVING-HEAD USER MANUAL GUANGZHOU LIGHTSTAR LIGHT CO.,LTD Http://www.lightskystar.com...
- Page 2 1.INDEX Many thanks for choosing THUNDER-60S moving head.The design&production are passed through the full quality control to ensure the fineness ability. This manual covers important information about install- ation&operation of this projector.Please rsad this user manual carefully before installing or operating this projector.Please do follow the safety instruction.list as below carefully and keep this...
-
Page 3: Channel Menu
3.Install and safe usage CHANNEL MENU: 3.1 Install the porjector: 3.1.1 Requirement for the installing place: Please do ensure fasten the mount bracket firmly before installing. The mount bracket must share the weight 10 multiple weight of the projector`s. 3.1.2 The method of installstion and caution: 3.1.2.1 Connect the mount bracket well and fix the clamp firmly to the truss in order to avoid the projector loose or falling. -
Page 4: Technical Parameter
TECHNICAL PARAMETER: When fix the orientation of the projector. Please keep the minimum distance between the flammable retarding subject and the porjector`s VOLTAGE: AC90- 240V 50/60Hz shot is 0.8M at least.(Picture1) But the minimum distance between the inflammable and the projector`s lens should be kept away 2m at least. LIGHT SOURCE: 60W LED (Picture2). -
Page 5: Operating Mode
2、PAT1 3.1.2..6.6.1 Please check the voltage, frequency data of power sup- SUAP----OFF Pan,Tilt normal ply system id suitable for the mentioned on the projector. Please do ON Pan,Tilt interchange avoid the different voltage between them and burn the projector. P,1NU----OFF Pan, foreward 3.1.2.6.6.2 Please refer to the actual wattage of the projector`s ON Pan, inversion T,1NU----OFF Tilt foreward...
Need help?
Do you have a question about the THUNDER-60S and is the answer not in the manual?
Questions and answers