Sony PMC-MD55 Service Manual page 13

MD MECHANISM DECK
5 two screws
(BVTTWH M3)
7 MD mechanism deck
(MDM-5A)
SLIDER (CAM)
2 bracket (Guide L)
1 two screws (P2.6 × 6)
3 leaf spring
1 four claws
6 harness
6 slider (Cam)
2 shield plate (upper)
• Note for Installation of Slider A (Cam)
Set the shaft of Cam gear to
be at the position in the figure.
5 bracket (Guide R)
– 13 –
5 two screws
(BVTTWH M3)
3 connector
(CN601)
4 wire, parallel (ffc) 21P
(CN102)
4 wire, parallel (ffc) 23P
(CN103)
Set the shaft of Lever (O/C) to
be at the position in the figure.
4 two screws (P2.6 × 6)