1. Manuals
  2. Brands
  3. Fuso Manuals
  4. Fish Finder
  5. FEG-881
  6. Operation manual

Fuso FEG-881 Operation Manual

8 inch color gps, plotter; fish finder
Hide thumbs
Table of Contents

Advertisement

Quick Links

FEG−881
OPERATION MANUAL
8 INCH COLOR GPS・PLOTTER・FISH FINDER

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FEG-881 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Fuso FEG-881

Summary of Contents for Fuso FEG-881

  • Page 1 FEG−881 OPERATION MANUAL 8 INCH COLOR GPS・PLOTTER・FISH FINDER...

  • Page 2: Table Of Contents

    Table of Contents 1. GPS Overview ...............................2 2. Features.................................3 1. GPS Antenna & Receiver........................4 2. Main Unit Features & Functions ......................4 3. Standard Scope of Supply ........................7 3. Device & Display ............................8 1. Display Device............................8 2. Remote Controller Button .......... エラー! ブックマークが定義されていません。 3.
  • Page 3 CAUTION Prohibition for the installation to an unstable place Please do not install in an unstable place and not level place. And please fix the stand for unit attachment to a mount with a screw PROHIBITION Have happen to be a fire by fall or there is fear of injury. Please check and attach the unit to the following place.
  • Page 4 Failure to avoid the following potentially hazardous situations may result in injury or property damage. Use the chart plotters only as a navigational aid. Do not attempt to use the chart plotters for any purpose requiring precise measurement of direction, distance, location or topography. The Global Positioning System(GPS) is operated by the United States government, which solely responsible for its accuracy and maintenance.
  • Page 5 GPS PLOTTER This chapter provides an overview of the GLOBAL POSITIONING SYSTEM (GPS) - 1 -...

  • Page 6: Gps Overview

    1. GPS Overview The Global Positioning System is based on a radio navigational system using satellites. An unlimited number of users are provided with accurate three-dimensional positions. This 24/7, worldwide coverage, is available under any weather condition. GPS can provide two-dimensional and three-dimensional position information. 3D positioning is mostly used in aircraft or other applications requiring latitude, longitude and altitude.

  • Page 7: Features

    FEATURES 2. Features This chapter provides Features of GPS Plotter. GPS Antenna & Receiver Main Unit Features & Functions Standard Components - 3 -...

  • Page 8: Gps Antenna & Receiver

    1. GPS Antenna & Receiver GPS Antenna Type : All-weather Micros trip patch antenna Power Supply : Receiver Module Size & Weight : φ65x 183mm (include spacer) 0.2kg Receiver Receiving Frequency : 1575.42 ± 1MHz Receiving Architecture : 18 channel Multiple Tracking Receiving Channel : 18channel Receiving Code...
  • Page 9 Effective Display Range : Less than Latitude 85° Menu : Pull-down Menu System Coast Line Chart : FUSO ORIGINAL MAP Display on the Tracking Screen C-MAP (possible to use by purchase) Track Display : Memory Interval – Stop Track Memory, 1 sec.
  • Page 10 Fish Finder Display Colors 8-16 colors ・ Frequency 50/200kHz Dual Frequency “TRANSMITTED ALTERNATELY” ・ Out put 600w (can change to HIGH/LOW 2 steps) ・ Depth Ranges 0−1,500m ・ Display Modes Normal, Pursuit Zoom, Bottom Lock Zoom ・ Alarms Keel Alarm : (0−999m) ・...

  • Page 11: Standard Scope Of Supply

    3. Standard Scope of Supply FEG-881 GPS・PLOTTER・FISHFINDER Name Specification Q’ty Remark Main Unit FEG-881 GPS Antenna GPS-18 With spacer code10m Stand MP-881 Installed to unit Power Cable CVV SB 0.75 SQ MM x 2C O881A Spare Fuse 3A X 2(24V), 7A X 1(12V)

  • Page 12: Device & Display

    Device & Display 3. Device & Display This chapter provides Device & Display about GPS Plotter. Display Device Remote Controller Power ON/OFF Menu Plotter - 8 -...
  • Page 13 1. Display Device Speaker Button, Alarm sound. Bright LCD dimmer control LCD Day/Night Mode Power Power ON/OFF Remote Controller function menu Switch Button C-User, C-Map card Slot .N/S, W/E, +/- mutual Switch C-User card slot (Left) .Waypoint Jump & Reverse Navigation Button : User Data Load/Back up .Fish Finder frequency select Low/High C-Map card slot (Right)
  • Page 14 Power ON/OFF Power ON Press Power OFF Press and hold approximately 2 sec. 【Note】☞ Power Button on Main Unit is always active, but on remote control is active when wire-connected to main unit only. - 10 -...

  • Page 15: Menu

    4. Menu 1. DATA 2.SET 1. TRACK DATA 1. NAVIGATION SET 2. MARK DATA 2. ALARM SET 3. OWN SHIP SET 3. USER’S LINE 4. WAYPOINT DATA 4. CURSOR SET 5. ROUTE DATA 5. SHIP TRACKING 6. DISK FORMAT 6. SIMULATION 7.

  • Page 16: Display Mode

    5. Display Mode Display mode change at [Plotter Display Only] Plotter Navigation Display mode change at [Plotter/Fishfinder Display] Plotter Plotter/Fishfinder Fishfinder Navigation A own ship position certainly serves as the destination number 0000, and destination 0000 cannot edit. - 12 -...
  • Page 17 GPS Plotter Display 19 20 23 24 25 - 13 -...
  • Page 18 Definition Description Own ship Latitude Latitude position of own ship Own ship Longitude Longitude position of own ship Own ship Speed Present Own ship Speed, SOG(Speed of Ground) Own ship Course Present Own ship Course, COG(Course of Ground) GPS status If no GPS or DGPS signal, Displays "Not-Ready"...
  • Page 19 C-MAP Plotter Display 19 20 23 24 25 - 15 -...
  • Page 20 Definition Description Own ship Latitude Latitude position of own ship’s Own ship Longitude Longitude position of own ship’s Own ship Speed Present Own ship’s Speed, SOG(Speed of Ground) Own ship Course Present Own ship’s Course COG(Course of Ground) GPS Status If no GPS or DGPS signal, Displays "Not-Ready"...
  • Page 21 Day/Night Mode in Plotter Display Press ) Open the menu such as Transparency, Day/Night mode. - 17 -...
  • Page 22 Navigation Display In Navigation Display(Press ), You can see Own ship’s position, Speed, Bearing in full screen which is helpful for your sailing. - 18 -...
  • Page 23 Fish finder Combo Display & Fish finder Display - 19 -...

  • Page 24: Operating Instruction

    Operating Instruction 4. Operating Instruction This chapter provides Operating Instruction in FEG-881series. DATA SYSTEM FISH FINDER - 20 -...

  • Page 25: Data

    1. Data 1.1 Track Data 1.1.1 Track Set Use this function to set the Vessel’s navigation Track. Total track capacity is 20,000 points. When the point is over 20,000, it is deleted previous point one by one. Press ), move [1.DATA] [1.TRACK DATA] [1.SET] in order.
  • Page 26 < TRACK Memory Interval & Max. Memory time, Date> Memory Interval Maximum Memory time & Date 5 sec 27h 47m = 1day 4h 10 sec 55h 33m = 2days 7h 30 sec 166h 39m = 6days 22h 1 min 333h 19m = 13days 21h 5 min 1666h 35m = 69days 10h 10 min...
  • Page 27 1.1.2 TRACK Clear Use this function to erase the Track line of the Vessel. Press ), Move [1.DATA] [1.TRACK DATA] [2.CLEAR]. Select one of below TRACK CLEAR method, Press 1.ALL TRACK : Clear all Track line 2.COLOR : Clear Each color of Track line Display [Clear confirm], Select 『YES/NO』.
  • Page 28 1.1.3 TRACK CALC Use this function to calculate the Vessel’s Track. Press ), Move [1.DATA] [1.TRACK DATA] [3.CALC.]. After selecting below TRACK CALC, Press 1. ALL TRACK : Calculate all memory Track • 2. COLOR : Calculate each color memory Track - 24 -...
  • Page 29 1.1.4. TRACK Save Use this function to save Track Data to selected device while Vessel navigates. Insert save device. ( It may be omitted when you use Internal ROM & COM PORT) ☞ Press ), Move [1.DATA] [1.TRACK DATA] [4.SAVE]. Use Direction key and ) button and Input 4 digits file name, Press...
  • Page 30 1.1.5 TRACK Load Load saved file from '1.1.4 TRACK Save' and Display on the plotter screen. Insert save device to load saved file. It can be omit ted, in case of Internal ROM & COM PORT.) ☞ Press ), Move [1.DATA] [1.TRACK DATA] [5.
  • Page 31 1.1.6 TRACK Erase It is a function to erase TRACK file saved device at '1.1.4 TRACK Save'. Be attention to use this menu, You never recover once you complete this menu. Insert the device that has files to be erased. ( Internal ROM is non -available) ☞...

  • Page 32: Mark Data

    1.2 MARK Data 1.2.1 Mark Select Use this function to select which Mark type to show on the screen. There are 21 unique MARK types. Press ), Move [1.DATA] [2.MARK DATA] [1.SELECT]. Select MARK & its color using by Direction key & On the screen, Use ) to select MARK.
  • Page 33 1.2.2 MARK Append It is a function to append Mark at location of Own ship or certain Latitude/Longitude. Press ), Move [1.DATA] [2.MARK DATA] [2.APPEND]. Select the position of MARK to append, Press 1.SHIP POS : Append MARK at current Own ship’s position. 2.LAT/LON : Append MARK at indicated Latitude/Longitude position.
  • Page 34 【NOTE】☞ The other way to input MARK 1. In no cursor, Press ) to be input MARK at own 2. ship position. 2. Press ), Move cursor, Press ) to input easier. 【NOTE】☞ MARK Management User needs to manage its color before input MARK. Then you may erase it easier after you need to.
  • Page 35 1.2.3 MARK CLEAR '1.2.2 Function to clear a mark. Possible to clear when you press ) button after put the cursor onto MARK in a Plotter screen. Press ) button and move [1.DATA] [2.MARK DATA] [3.CLEAR]. Press ) button after select MARK Clear. 1.
  • Page 36 1.2.4 MARK SAVE '1.2.2 MARK’ is saved to saving tool as a file. Insert things to be saved. ( Possible to omit when using Internal ROM & COM PORT) ☞ Press ) button and move to [1.DATA] [2.MARK DATA] [4.SAVE]. After input 4 digits of file name by using Direction button, ) button or number button and then Press...
  • Page 37 1.2.5 MARK Load '1.2.4 Display a mark in a Plotter screen after calling a saved file from a storage tool. Insert storage tool to be called a file( Possible to omit when using Internal ROM & COM PORT) ☞ Press ) button and move [1.DATA] [2.MARK DATA] [5.LOAD].
  • Page 38 1.2.6 MARK ERASE '1.2.4 Erased a saved MARK file from a storage tool. Must be careful to command this delete due to no-recover the file. Insert a storage tool having a file to be erased. ( Possible to omit when ☞...

  • Page 39: User Coast Line

    1.3 USER COAST LINE 1.3.1 COAST LINE MARK Displayed a coastal line drawn by a user into a Plotter screen. In setting『ON』, the coastal line is displayed in a function of '1.3.2 Coastal Line Drawing' in advance. Press ) button and move [1.DATA] [3.USER’S LINE] [1.DISPLAY].
  • Page 40 1.3.2 COASTAL LINE DRAWING Displayed a coastal line by a user and it can register Line drawing, MARK, character till 999 score each. Press ) button and after [1.DATA] [3.USER’S LINE] [2.DRAWING] and then press ) button. Displayed explanation of each button onto a left screen and the coordinates cursor is shown into a Plotter screen.
  • Page 41 1.3.3 COASTAL Line STORAGE '1.3.2 Coastal data is saved into a storage tool in a coastal drawing. Insert a tool to be saved.( Possible to omit when using Internal ROM, COM PORT) ☞ Press ) button and move [1.DATA] [3.USER’S LINE] [3.SAVE].
  • Page 42 1.3.4 COASTAL LINE LOAD '1.3.3 Displayed a mark in a Plotter screen after calling a saved file from a storage tool. Insert storage tool to be called a file( Possible to omit when using Internal ROM & COM PORT) ☞ Press ) button and move [1.DATA] [3.USDE’S LINE]...
  • Page 43 1.3.5 COASTAL LINE ERASE '1.3.3 Delete a coastal line file from a storage tool. Must be careful to command this delete due to no-recover the file. Insert a storage tool having a file to be deleted. ( Possible to omit when using ☞...

  • Page 44: Waypoint Data

    1.4 WAYPOINT DATA 1.4.1 Waypoint Mark Function to mark the waypoint that the user registered into a Plotter screen. In setting『ON』, the waypoint is marked in a function of '1.4.2 Waypoint Edit' in advance. Press ) button and move [1.DATA] [4.WAYPOINT DATA] [1.DISPLAY].
  • Page 45 1.4.2 WAYPOINT EDIT Function to register a point of an important or frequent navigation in advance and can be possible to register till 9979 score. Use cursor and route navigation from 9980 to 9999 Press ) button and move [1.DATA] [4.WAYPOINT DATA] [2.EDIT].
  • Page 46 In there are cursors onto a Plotter Screen, when press ) button, the position that has a current cursor is auto-registered as the waypoint. In there are no cursors onto a Plotter Screen, when press ) button, the position of the current own-ship is auto-registered as the waypoint Besides, after move to the position to be registered as a waypoint onto a Plotter Screen and then, move [1.DATA] [4.WAYPOINT DATA]...
  • Page 47 1.4.3 WAYPOINT STORAGE This function is to save the Lat/Long of the waypoint, MARK, name registered from '1.4.2 Waypoint Edit' into an available storage tool as a file. Insert a tool to be saved.( Possible to omit when using Internal ROM, COM PORT) ☞...
  • Page 48 1.4.4 WAYPOINT CALL '1.4.3 Display a waypoint in a Plotter screen after calling a saved file from a storage tool. Insert storage tool to be called a file( Possible to omit when using Internal ROM & COM PORT) ☞ Press ) button and move [1.DATA] [4.WAYPOINT DATA] [4.LOAD].
  • Page 49 1.4.5 WAYPOINT ERASE '1.4.3 Deleted a coastal line file from a storage tool. Must be careful to command this erase due to no-recover the file. Insert a storage tool having a file to be erased. ( Possible to omit when using INTENAL ROM) ☞...

  • Page 50: Route Data

    1.5 ROUTE DATA 1.5.1 Route Edit Function to register waypoint into a navigation route and it can be registered till 20 numbers and the waypoint can be registered till 20 numbers per a route. The Lat/Lon of the waypoint should be registered into [1.DATA] [4.WAYPOINT DATA] [2.EDIT] in advance and it can be possible to...
  • Page 51 In case of navigating to jump up a certain of the waypoint in a navigate route, move the cursor to the required number and then, press ) button. “J” (Jump) character is shown in beside of the waypoint number and it can be exempted from a waypoint route temporarily.

  • Page 52: Disc Format

    1.6 DISC FORMAT After you purchase C-USER card, you must format it in advance. You can’t save any data without the Disc Format. Press ) button and move [1.DATA] [6.DISK FORMAT]. Insert C-USER card for a format After insert C-USER card, press ) button.

  • Page 53: The Seabed Symbol

    1.7 THE SEABED SYMBOL Use this function to see description of abbreviated form and symbol for seabed displayed on the plotter chart. Press ) button, after move [1.DATA] [7.SEABED TYPE] and then, press ) button. 【NOTE】☞ Display ‘Calendar' on the screen Navigation or Plotter screen, Press ), and Select [7.

  • Page 54: Program Update

    1.8 PROGRAM UPDATE Able to replace the plotter program in a main after call the newest plotter program saved into a storage tool. Insert a storage tool with a newest Plotter program. After press ) button and move [1.DATA] [7.PROGRAM UPDATE], then press ) button.

  • Page 55: Set Up

    2. SET UP 2.1 Navigation Set Up 2.1.1 How to set up a waypoint navigation This function is used when the vessel navigates between two waypoints registered in '1.4.2 Waypoint Edit' or to the waypoint registered in a current own position. Press ) button and move [2.SET] [1.NAVIGATION SET]...
  • Page 56 The red line is shown from a start point of Waypoint to an arrival point of Waypoint and the Lat/Lon, approach speed, direction, distance and time of the arrival point of the waypoint are shown in a bottom-left of the plotter screen. Refer to 'Chapter 3.
  • Page 57 2.1.2 HOW TO SET UP A ROUTE NAVIGATION Set up a Route Navigation by using a menu This function is used when course-navigate along the route registered in '1.5.1 Route Edit' with. Press ) button and move [2.SET] [1.NAVIGATION SET] [2.ROUTE NAVIGATION].
  • Page 58 The red line is shown from a current position to a first route position and the rest positions registered into a route navigation is shown with a bright-grey line. The Lat/Lon, approach speed, direction, distance and time of the navigating route point are shown in a bottom-left of the plotter screen.
  • Page 59 How to set up a Route Navigation by using a course button. Register a new waypoint by using ) button and set up a route-navigation at the same time. It can be used in order to set up a new route-navigation in a plotter screen with ease. When press ) button in a Plotter, the coordinates CURSOR connected to own-ship with a red line is shown.
  • Page 60 2.1.3 HOW TO SET UP ANCHOR In case of Anchor, it is used to protect a break away from an anchor range set up as inputting the position information of the current own-ship. It can be used with '2.2.3 ANCHOR ALARM'. Press ) button and move [2.SET] [1.NAVIGATION]...
  • Page 61 If set up a range of Anchor Alarm to [2.SET] [2.ALRAM SET] [3.ANCHOR ALARM], the range of anchor alarm show as a red circle in a plotter screen. Besides, the relative information as such Lat/Lon, direction, break away distance etc. with set up “ANCHOR”...
  • Page 62 2.1.4 How to clear Navigation This function enables the operators to clear the Waypoint Navigation, the navigational functions of Route Navigation, Anchorage Setup and Monitoring Setup. Press ) button, go through [2.SET] [1.NAVIGATION SET] [4.EXIT WPT/RTE/ANCHOR]. Press ) button, then the above-shown navigational functions, the anchorage setup, the monitoring setup will be all cleared.

  • Page 63: How To Alarm

    2.2 How to Alarm 2.2.1 Arrival Alarm In using Waypoint Navigation and Route Navigation, this function is designed to create an alarming once the own ship enters into the radius distance of the preset final destination. Press ) button, go through [2.SET] [2.ALARM SET] [1.ARRIVAL ALARM].
  • Page 64 2.2.2 Derailment Alarm In using the Waypoint Navigation and Route Navigation, this function creates an alarming once the own ship derails the preset course range on her way to the destination. Press ) button, go through [2.SET] [2.ALARM SET] [2.XTE ALARM]. ) button to select ON/OFF.
  • Page 65 2.2.3 Anchorage Alarm In using the anchorage in '2.1.3 Anchorage Setup', establish the anchorage range so that the equipment can send out an alarming when the owns ship gets out of the preset rang mostly due to the tidal wave, the ocean weather etc. Press ) button, go through [2.SET] [2.ALARM SET]...
  • Page 66 2.2.4 Underwater Cable Alarming When under voyage, the own ship can use the function to create an alarming where any underwater cables are installed. Press ) button, go through [2.SET] [2.ALARM SET] [4.SEA-CABLE ALARM] . Press ) button to select『ON/OFF. - 62 -...
  • Page 67 2.2.5 Water Depth Alarming This function is to provide an alarming for the operators when it senses any specific water depth within the preset alarming range through the transducers. It is available to input 1m ~ 999m. Press ) button, go through [2.SET] [2.ALARM SET] [5.DEPTH ALARM].
  • Page 68 2.2.6 Fish School Alarming This is a function to make an alarming when the equipment senses any fish school under voyage. Press ) button, go through [2.SET] [2.ALARM SET] [6.FISH ALARM]. ) button to select ON/OFF』and the signals of fish school as『Low, Mid, High.』 - 64 -...

  • Page 69: How To Set Up Own Ship

    2.3 How to set up Own Ship With this function, it is available to set up a variety of information on the own ship. Press ) button, go through [2.SET] [3.OWN SHIP SET]. Use the directional buttons, ) button, ) button to set up every items shown below. - 65 -...
  • Page 70 Setup Items Input Range Description 1.AUTO CENTER ON/OFF To indicate that the own ship is in the very center of the display all the time. 2.SHIP MARK SIZE Large/Small To set up the size of the own ship shown in the display.

  • Page 71: Cursor Setup

    2.4 Cursor Setup This enables the operator to set up the information on Cursor shown on the plotter display. Press ) button, go through [2.SET] [4.CURSOR SET]. Use the directional buttons ) buttons to select the size, color, shape, and line. 1.CURSOR SIZE : Big/Small 2.CURSOR COLOR...

  • Page 72: Simulation

    2.6 Simulation This enable the operators to artificially make the data required for the real navigation to look as if ships are under voyage on the Plotter Display. Press ) button, go through [2.SET] [6.SIMULATION]. ) button to set up『ON/OFF』to be used for Simulation. 1.PLOTTER : Plotter Simulation ON/OFF 2.FISH...

  • Page 73: How To Set Up Miscellaneous

    2.7 How to set up Miscellaneous User can set up any additional functions on SYSTEM and Plotter. Press ) button, go through [2.SET] [7.ETC. SET]. Use the directional buttons, ) button, ) button to set up the items shown below. - 69 -...
  • Page 74 Miscellaneous Setup Input Range Description Items 1. Distance Unit NM/KM/MM Select the distance unit on the Display. NM: Nautical Mile (1NM = 1,852 m) KM: Kilometer (1KM = 1,000 m) MM: Land Mile (1MM = 1,610 m) 2. Magnetic Yar. True/Magnetic True North differs slightly from Magnetic E00.0°~ E99.9°...

  • Page 75: System

    3. System 3.1 Satellite Information This is to set up the related information on GPS and necessary for navigation. Press ) button, go through [3.SYSTEM] [1.SATELLITE INFO]. Use the directional buttons, ) button, ) button to set up each item shown below. - 71 -...
  • Page 76 Satellite Info. Item Input Range Description 1.Initial Pos. LAT: 90°N ~ 90°S User can set up the information on the own ship position. LON: 180°E ~ Ex) When cannot receive GPS, DGPS 180°W signal, the information on the current position of own ship can be input.

  • Page 77: How To Test Keyboard

    3.3 How to test Keyboard Users can make a self-test to see if the remote works okay. Press ) button, go through [3.SYSTEM] [3.KEYBOARD TEST]. Whenever each button is pressed, it is normal if the button is conversed on the screen. If not, it is judged abnormal.

  • Page 78: How To Set Up System

    3.4 How to set up System Users can set up Input/Output ports used for system, AIS, memory, map, language in use etc. Press ) button, go through [3.SYSTEM] [4.SYSTEM SET]. Use the directional buttons and ) button to set up each item shown below. - 74 -...
  • Page 79 System Setup Item Input Range Description 1.GPS Port Set Internal/ Data input port of GPS can be set up External Internal: User can directly use the data received from GPS linked to this SYSTEM. External: User can use the data coming out from other equipment to input to this system 2.Output Port Set Selection Range...
  • Page 80 AIS Setup This is to show on the plotter display the ship together with the information received from AIS, such as Ship Name, MMSI numbers, Lat/Log, SOG, COG. Each ship has her own MMSI number, which is 9-digit ID, assigned and the first 3-digit numbers mean MID (Country Code) which tells her nationality or area.
  • Page 81 Details on AIS-Mounted Ship NAME : Ship Name C.SIGN : Call Sign MMSI : Maritime ID IMO.NO : IMO number DRAUGHT : Draught S-TYPE : Ship Type DEST. : Destination NAV. : Current Navigational Status LAT. : Latitude LON. : Current Longitude of Ship : Speed : Course : Heading...
  • Page 82 Press ) button, go through [3.SYSTEM] [4.SYSTEM SET] [3.AIS Set]. Use the directional button to select [1.Operate/Stop], then press ) button to make AIS function operate or stop on the screen. In selecting ‘Operate’, users can see “AIS” on the right top side of the screen. 【Note】☞...
  • Page 83 Use the directional buttons to select [2.DISPLAY SET], then press ) button to see the sub-menu on the screen that shows Ship Name,『MMSI,『Speed. Select the ship information of AIS to be displayed on the screen, then press ) button. - 79 -...
  • Page 84 Use the directional buttons to select [2.DISPLAY SET], then press ) button to input the target color of AIS. Press the number buttons to input MID(or country code) for the target to be set up on the screen, then press )button.
  • Page 85 Use the directional button to select [9. Other Colors], then press )button. It is available to select any color for other ships that have MID(or country code), except the preset colors from [3.Target Color-1] through [8.Target Color-6]. Use the directional buttons to select the target color shown below, then press ) button.

  • Page 86: System Information

    3.5 System Information Users can recognize the system information such as LCD, Plotter Model, Program, Chart, PIC Version. Press ) button, go through [3.SYSTEM] [5.SYSTEM INFO]. Use the directional ) button to set up each item shown below. Sys.-Info. Item Input Range Description 1.LCD-MODE...

  • Page 87: Fishfinder(Navis-800F)

    4. FISHFINDER GPS chart plotter with fish-finder To see the display of GPS chart plotter with fish finder, press Depth Water temp. Fish-finder: Low Freq Plotter Fish-finder: High Freq. STC & GAIN set of fish-finder: Low Freq./High Freq. Press on plotter with fish-finder or fish-finder mode. 【Ref.
  • Page 88 Display for fish-finder only You may choose a display mode by ) and also the display mode depends on frequency (High freq./Low freq.) by Water depth Display mode Fish-finder with Low Freq. Fish-finder with High Freq It shows setting menu if press ) button on plotter/fish-finder display or display only for fish-finder.
  • Page 89 Fish-finder line & homing magnification screen ) button to choose a display mode, ) button for high freq./low freq. and ) button for line & homing magnification screen. - 85 -...

  • Page 90: Screen Moving Speed

    4.1 Screen moving speed A function to adjust a screen moving speed. Press ) and go to [4.FISH] [1.SCREEN SPEED]. Select one of 『Stop, Low, Mid, High, Super High』 by using direction cursor and press - 86 -...

  • Page 91: Noise Erase

    4.2 Noise Erase To erase an interfacing signal occurs periodically or temporally is shown as noise on fish-finder display. Press ) and go to [4.FISH] [2.NOISE ERASE]. Select one of『Off, Low, Mid, High』by using direction cursor and press - 87 -...

  • Page 92: Color Erase

    4.3 Color Erase Clear a color for noise and response for unnecessary school of fish step by step. It helps to recognize of big fish group with distinct display. Press ) and go to [4.FISH] [3.COLOR ERASE]. Select one of『Off, Low, Mid, High』by using direction cursor and press - 88 -...

  • Page 93: Tx Power Set

    4.4 TX POWER SET To adjust a transmitting output of supersonic wave transmitted from transducer. Press ) and go to [4.Fish] [4.TX-POWER SET]. Select『High/Low』and press In case of『Low』, the output is automatically adjusted depends on water depth range. - 89 -...

  • Page 94: Pulse Width Set

    4.5 PULSE WIDTH SET In response to range of depth and transmitting times, adjust transmitting power by LOW and HIGH about automatic adjustment of pulse width. Press ) and go to [4.FISH] [5.PULSE WIDTH]. Select『Low/High』and then press - 90 -...

  • Page 95: Color Pattern Set

    4.6 COLOR PATTERN SET Select a color to show a fish group and three colors available. Press ) and then go to [4.FISH] [6.COLOR PATTERN]. Select『Pattern 1, Pattern 2, Pattern 3』and then press - 91 -...

  • Page 96: A-Scope Set

    4.7 A-SCOPE SET A-scope on or off. Press ) and then go to [4.FISH] [7.A-SCOPE SET]. Select ON/OFF』and then press - 92 -...

  • Page 97: Etc Set

    4.8 ETC SET To set a draft (water-depth adjustment), water temperature display/offset and frequency. Press ) and go to [4.FISH] [8.ETC. Set]. You are able to set following item by direction cursor, number button and ) button. List of system info. Input Range Description 1.DRAFT SET...

  • Page 98: System Maintenance & Diagnosis

    5. System Maintenance & Diagnosis 5. System Maintenance & Diagnosis This Chapter describes a Maintenance and Diagnosis for NAVIS Series. System Maintenance and Repair. Diagnosis - 94 -...

  • Page 99: System Maintenance And Repair

    1. System Maintenance and Repair It is essence to have a routine maintenance and troubleshooting for the equipment for keeping its performance in a normal condition. Maintenance and troubleshooting means periodical check up the system, software up-grade including following items. Item Contents Connector &...

  • Page 100: Diagnosis

    2. Diagnosis Following describes the general status of the troubles and how to treat the troubles. Operator should not try to check inside the machine even the application of routine troubleshooting described in Manual does not work. Wrong check and maintenance, repair can cause to deteriorate the performance of the machine and reduce the lifetime of the machine.

  • Page 101: Appendix

    Appendix 6. Appendix This Chapter describes the appendix related to the operation of the unit. Appendix 1. Geodetic Datum Appendix 2. Packing List Appendix 3. Installation Drawings - 97 -...

  • Page 102: Appendix 1. A Geodetic Datum

    Appendix 1. A geodetic datum 01. WGS-84 46. Brazil 02. WGS-72 47. New Georgia Islands 03. TOKYO 48. Easter Island 04. NAD-27 49. Maldive 05. North American 1927(Canada,Alaska) 50. Guam 06. Europen 1950(Europe) 51. Guadalcanal Island 07. Australian geodetic 1969(Australia) 52.

  • Page 103: Appendix 2. Packing List

    Appendix 2. Packing List FEG-881 FEG-881 (1/2) Item External Feature Dimension Q’ty CHK Remark FEG-881 Main Unit CODE NO. FEG-881 Mounting Bracket CODE NO. MP-881 Ø6mm × 17 Knob CODE NO. SAN-60 RG58C/U Antenna CODE NO. GPS-18 10M/20M CVV SB 0.75 SQ MM x 2C DC Power Cable CODE NO.
  • Page 104 FEG-881(2/2) Item External Feature Dimension Q’tyCHK Remark OPTION C-MAP Card CODE NO. C-MAP OPTION C-USER Card CODE NO. C-MAP-BAK - 100 -...

  • Page 105: Connecting Pins

    APPENDIX 2: CONNECTING PINS - 101 -...

  • Page 106: Dimensions

    DIMENSIONS (need more than 100mm for service space in main body rear) (unit: mm) - 102 -...

  • Page 107: Installing To The Main Body

    INSTALLING TO THE MAIN BODY - 103 -...

  • Page 108: Transducer

    TRANSDUCER ＴＤ-２０１Ｂ(Bronze) TO P ( INSE RT) 3 : TD 1 (W h ite ) 4 : G N D (sh ie ld ) 5 : TD 2 (Re d ) TRANSD U SER BO TTO M (SO LD E RING ) TD-881 (Plastic) φ70 ２core shield（L=8000）...

  • Page 109: Antenna

    ●Installing the antenna When installing GPS antenna and other antenna, please make a distance like following drawing . choose the place where less effect of other electronics devices in the ship. VHF whip antenna whip Ｖ Ｈ Ｆ Over 4m Over 1.5m Loop antenna...
  • Page 110 ● Please keep it away from the noise outbreak souce more than min. 2M. ● Please detach the codes (a power code, an antenna code) of this machine as much as possible without bundling together with the codes of the apparatus (wireless radio, etc) ●...
  • Page 111 - 107 -...
  • Page 112 Marine Products Division 601, Fuseminami Bld. 3-1-7, Ajiro, Higashi-Osaka Osaka Japan 577-0841 http://www.nakanoeng.com - 108 -...

Table of Contents