Zanussi ZBB28460SA User Manual page 12

x
x
If necessary cut the
adhesive sealing strip
and then apply it to
the appliance as
shown in figure.
12
2
1
Install the appliance in
the niche.
Push the appliance in
the direction of the ar-
rows (1) until the up-
per gap cover stops
against the kitchen
furniture.
Push the appliance in
the direction of the ar-
rows (2) against the
cupboard on the op-
posite side of the
hinge.
4mm
44mm
Adjust the appliance
in the niche.
Make sure that the
distance between the
appliance and the
cupboard front-edge
is 44 mm.
The lower hinge cover
(in the accessories
bag) makes sure that
the distance between
the appliance and the
kitchen furniture is
correct.
Make sure that the
clearance between
the appliance and the
cupboard is 4 mm.
Open the door. Put
the lower hinge cover
in position.
I
I
Attach the appliance
to the niche with 4
screws.
www.zanussi.com