Advertisement
Quick Links
Long Range Infrared Housing
CONTENTS
SAFETY INFORMATION... ..................................................
PART DESCRIPTION & DIMENSION.....................................
INSTALLATION..................................................................
SPECIFICATION................................................................
Before attempting to connect or operate this product, please read these
instructions carefully and save this manual for future use.
ZEIM-4000224G A.5 070
1
3
4
15
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Messoa SLI070HB
-
Page 1: Table Of Contents
Long Range Infrared Housing Instruction Manual ZEIM-4000224G A.5 070 CONTENTS SAFETY INFORMATION............. PART DESCRIPTION & DIMENSION........INSTALLATION..............SPECIFICATION..............Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. -
Page 3: Instruction Manual
SAFETY INFORMATION Safety Information: 1. Read this Instruction Manual: Before using the product, please carefully read through the safety information and operation instructions. 2. Keep this Instruction Manual: Safely store the Instruction Manual for future reference. 3. Follow instructions: When operating the unit, please follow instructions on the Instruction Manual. - Page 4 SAFETY INFORMATION 11. Maintenance: When the following occurs, please first power off the unit and then perform maintenance by qualified maintenance staff: (a). Damaged power cable or socket (b). Liquid spills or foreign objects in the unit (c). Inoperable unit when proper instructions are followed (d).
-
Page 5: Part Description & Dimension
PART DESCRIPTION & DIMENSION 1. Structure Illustration: The figure above is the illustration of the housing, which may be used with most of ICR real Day and Night cameras. 2. Dimension and Accessory Accessory Pack (1) Video sync cable (7) Spacer (2) Day/night sync cable (8) 2 Screws (for tripod stand) (3) Camera power cable... -
Page 6: Installation
INSTALLATION 3. How to install the camera and bracket: Take the bracket from the box and put the power cable and video cable through the bracket then fix the bracket to the wall. (Loose the screws of the bracket for easy assembly if necessary.) Secondly, take out the housing and open the side cover with hexagon screw driver. - Page 7 INSTALLATION Put the power cable and video cable through the bottom of the housing and let them pass from the hole. Attention: Two solutions are available for waterproof: (1) User can take out the spacer from the accessory pack and stick it right by the outlet (Fig A) or (2) use the three glands cover and let the power cable and video cable pass through the hole of glands cover (Fig B).
- Page 8 INSTALLATION 3.4 Open the side cover and you can see the housing inner part. There are two installation types. Inner Part Definition power connector board (only IR LED driver board in AC90~260V housing) Power Adpator ( only in AC90~260V housing) Heater board Camera...
- Page 9 INSTALLATION 3.4.1 Inner Part Installation: MESSOA SCB261, SCB265PRO, SCB282PRO 3.4.1.1 Install the camera to the camera position as illustrated. 3.4.1.2 Enable the day/night sync funciton: connect the day/night sync cable to P203 and the to the BW/GND port (pin side; BW: brown line, GND: black line) of the camera back.
- Page 10 INSTALLATION 3.4.1.3 Enable the video sync funciton: connect the video sync cable to P202 and to the to the video output port of the camera. IR LED driver board video sync cable...
- Page 11 INSTALLATION 3.4.1.4 Be sure to switch the S203 mode on the IR LED driver board to the "Middle" position. Middle Down...
- Page 12 INSTALLATION 3.4.2 Inner Part Installation: MESSOA NIC836i and Other Brands 3.4.2.1 Install the camera to the camera position as illustrated. 3.4.2.2 Enable the day/night sync funciton: connect the day/night sync cable to P203 and the to the AL. I./GND port (pin side;...
- Page 13 INSTALLATION 3.4.2.3 Be sure to switch the S203 mode on the IR LED driver board to the "Up" position. Middle Down...
- Page 14 INSTALLATION 3.5 Connect the power cable to the power port of the AC24V camera and to the A section (L+: power +/ N-: power- ) as below. Connect the outside AC24V power supply to the section B (L+: power+/ N-: power- ). Partial heater board Note: For the AC90~260V housing type, connect the power cable to the power port of the AC90~260V camera and to A section...
- Page 15 INSTALLATION Then, close the side cover and use the provided screws to fix the housing on the bracket with hexagon screw driver. Loosen the pan and tilt adjustment screw of the bracket to modify the angle of the housing and then tighten the screw.
- Page 16 INSTALLATION Replace the side cover and tighten the screws (A/ B).
-
Page 17: Specification
SPECIFICATION INFRARED ILLUMINATOR HOUSING INFRARED ILLUMINATOR HOUSING Model No SLI070HB-2 SLI070HB-7 Model Type Power Input Voltage AC 24 V AC 90-260 V Radiant Distance 70 m(230ft) 70M (230ft) Glass Thickness 6 mm tempered glass IR LED Wave Length 850 nm...
Need help?
Do you have a question about the SLI070HB and is the answer not in the manual?
Questions and answers