Dialighting IB50-MH User Manual

1 1 1 1 1 1 1 1 . . . . Maintenance Maintenance Maintenance and Maintenance and and and Cleaning Cleaning Cleaning Cleaning
The following points have to be considered during the inspection:
1) All screws for installing the devices or parts of the device have to be tightly connected and must not be
corroded.
2) There must not be any deformations on the housing, color lenses, fixations and installation spots (ceiling,
suspension, trussing).
3）Mechanically moved parts must not show any traces of wearing and must not rotate with unbalances.
4）The electric power supply cables must not show any damage, material fatigue or sediments.
Further instructions depending on the installation spot and usage have to be adhered by a skilled installer
and any safety problems have to be removed.
In order to make the lights in good condition and extend the life time, we suggest a regular cleaning to the
lights.
1) Clean the inside and outside lens each week to avoid the weakneness of the lights due to accumulation
of dust.
2) Clean the fan each week.
3) A detailed electric check by approved electrical engineer each three month, make sure that the circuit
contacts are in good condition, prevent the poor contact of circuit from overheating.
We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never use alcohol or
solvents.
There are no serviceable parts inside the device. Please refer to the instructions under "Installation
instructions".
Should you need any spare parts, please order genuine parts from your local dealer.
50W LED Moving Head
50W LED 50W 50W LED Moving LED Moving Moving Head Head Head Beam
IB50-MH IB50-MH IB50-MH IB50-MH
User Manual
User Manual User User Manual Manual
KEEP KEEP KEEP THIS KEEP THIS THIS THIS MANUAL MANUAL MANUAL MANUAL FOR FOR FUTURE FOR FOR
Beam
Beam Beam
FUTURE NEEDS FUTURE FUTURE NEEDS NEEDS NEEDS