Related Manuals for Mancorp Powerjet PJG-2001
Summary of Contents for Mancorp Powerjet PJG-2001
- Page 1 DIRECT-DRIVE PRESSURE WASHERS PJG SERIES PRESSURE WASHER OPERATOR’S MANUAL PJG-2001 PJG-2501-6.5 PJG-2501 PJG-3000 MANUFACTURED BY: PJG-3001 PJG-3501 PJG-4001 REVISED JUNE 2010...
-
Page 2: Machine Safety
It also contains chemicals known, Mancorp Industrial Sales Ltd. reserves the right to make in certain quantities, to cause cancer, birth defects or changes at any time without incurring any obligation. -
Page 3: Pre-Operation Check
11. Mancorp will not be liable for any changes made 4. Read engine manual, turn on gas valve, choke, to our standard units, or any components not turn switch to start position and pull rope to start. -
Page 4: Shut Down Procedures
PJG SERIES PRESSURE WASHER OPERATOR’S MANUAL SHUT DOWN PROCEDURES 1. Rinse all lines (and injector) with clean water, to remove any soap residue. 2. Turn engine off. 3. Turn off water supply. 4. Open spray gun to relieve remaining pressure. 5. - Page 5 PJG SERIES PRESSURE WASHER OPERATOR’S MANUAL MODEL: PJG-2001, PJG-2501-6.5...
- Page 6 PJG SERIES PRESSURE WASHER OPERATOR’S MANUAL MODEL: PJG-2501, PJG-3001, PJG-3501...
- Page 7 PJG SERIES PRESSURE WASHER OPERATOR’S MANUAL MODEL: PJG-2501, PJG-3001, PJG-3501...
- Page 8 PJG SERIES PRESSURE WASHER OPERATOR’S MANUAL MODEL: PJG-3000...
- Page 9 PJG SERIES PRESSURE WASHER OPERATOR’S MANUAL MODEL: PJG-3000...
- Page 10 PJG SERIES PRESSURE WASHER OPERATOR’S MANUAL MODEL: PJG-4001...
- Page 11 PJG SERIES PRESSURE WASHER OPERATOR’S MANUAL MODEL: PJG-4001...
- Page 12 PJG SERIES PRESSURE WASHER OPERATOR’S MANUAL ITEM PART NO. DESCRIPTION 2-2002 COUPLER, 3/8” FEMALE 4-020650 HOSE, 50’ x 3/8”, 100R1(1500psi to 3000psi) 4-020750 HOSE, 50’ x 3/8”, 100R2(4000psi) 4-01205 GUN, SHUT-OFF, ST1500 85-5170D36 WAND, INSULATED 36” 4-1280 NOZZLE, HIGH PRESSURE 4-16540 NOZZLE, SOAP, BLACK 2-2000...
- Page 13 PJG SERIES PRESSURE WASHER OPERATOR’s MANUAL...
- Page 14 PJG SERIES PRESSURE WASHER OPERATOR’s MANUAL...
- Page 15 PJG SERIES PRESSURE WASHER OPERATOR’s MANUAL...
- Page 16 - Transportation to service centre, field labour charges or freight damage. What you must do to obtain Warranty In order to obtain warranty from Mancorp you must return the defective product to your authorized dealer, freight prepaid, with proof of purchase, within the applicable warranty period. For warranty on failed components you must contact our service department for instructions on the procedure that Mancorp sees practical.
Need help?
Do you have a question about the Powerjet PJG-2001 and is the answer not in the manual?
Questions and answers