Kidde KN-COSM-B-RF-CA User Manual page 9

This alarm detects combustion particles using the ionization
technique. It contains 0.9 microcurie of Americium 241, a
radioactive material (see NRC Information section). Distributed
under U.S. NRC License No. 32-23858-01E. Manufactured in
compliance with U.S. NRC safety criteria in 10 CFR 32.27. The
purchaser is exempt from any regulatory requirements. Do not try to
repair the alarm yourself. Refer to the instructions in the Warranty
section for service.
Kidde 2-in-1 Smoke and Carbon Monoxide Alarms connect to each
other wirelessly to create the first Smart Wireless Network for fire
safety. When one of your Kidde Smart Wireless alarms is triggered,
a wireless signal will be transmitted to activate the rest of your
Kidde Smart Wireless alarms within 11 seconds, alerting you if you
are in other parts of the home. All other Smart Wireless alarms will
activate and remain in alarm mode until the initiating unit is silenced
or a non-initiating unit is silenced via a press of that unit's button.
Place Kidde alarms throughout your home for comprehensive
coverage, so that you will be alerted to any smoke or CO danger no
matter where you are in your home.
For instructions on how to set up your Kidde alarms
so that they communicate wirelessly, see the Installation Guide
section.
This alarm wirelessly interconnects with the following Kidde
product:
• Kidde 2-in-1 Smoke and Carbon Monoxide Alarm
(Model KN-COSM-B-RF-CA)
The Kidde Smart Wireless Network may be expanded with future
Kidde products.
9