Related Manuals for Custom Engineering BIG II Touch S
Summary of Contents for Custom Engineering BIG II Touch S
- Page 1 USER MANUAL BIG II TOUCH S BIG II TOUCH S SWEDISH MARKET 77200000000700 Commands manual:...
- Page 3 • Make sure that the device rests on a hard ing Standards: © 2012 CUSTOM ENGINEERING S.p.A. (non-padded) surface and that there is • EN 55022 Class B (Limits and methods – Italy. All rights reserved. Total or partial suffi...
-
Page 5: Table Of Contents
7 PAYMENTS ................................43 7.1 Receipt copy ..............................43 7.2 Credit ................................43 7.3 Cash ................................44 7.4 Cheque ................................45 7.5 Cheque with change calculation ........................46 7.6 Credit card ..............................47 BIG II TOUCH S 5 User Manual... - Page 6 12.5 Saving archives (Backup Flash --> MMC) ....................83 12.6 Archives recovery (Restore MMC --> FLASH) ..................... 83 12.7 Upgrade with device closed ......................... 84 12.8 Upgrade with device open ..........................85 13 FUNCTIONS CODES ............................87 6 BIG II TOUCH S User Manual...
-
Page 7: Introduction
1 INTRODUCTION This manual refers only to the BIG II TOUCH S Cash Register and not to an entire point-of-sale system. It is intended to supply the operator with all instructions for correct register use. Proper settings and register use will be described, as well as how to perform the most common functions as listed below: •... -
Page 8: Main Features
100 (8 of which are on the keyboard) Department group Operators 15 (with password option) 50 000 (with EAN code) Description for departments and PLU up to 22 characters Heading setting up to 42 characters x 6 lines 8 BIG II TOUCH S User Manual... - Page 9 10% to 80% Rh Storage temperature from -20 °C to +70 °C Storage humidity from 10% to 90% Rh (1) Referring to the standard CUSTOM receipt (L=10cm, Density = 12,5% dots on). BIG II TOUCH S 9 User Manual...
-
Page 10: Mechanical Dimensions
1. INTRODUCTION 1.3 Mechanical dimensions Width 248,8 mm Lenght 246,2 mm Height (with cover closed) 123 mm Weight (without paper roll) 1380 gr 246,2 10 BIG II TOUCH S User Manual... -
Page 11: Installation And Use
2. EJ electronic journal (already inserted into the slot) 3. Paper roll 4. Short guide 5. Fiscale manual + signalling guide 6. Upper foam packing shell 7. Device 8. Box 9. Lower foam packing shell BIG II TOUCH S 11 User Manual... -
Page 12: Cash Register Parts
15. COM1 serial port 4. Cover opening lever 10. Power supply 16. Drawer port 5. Cover for paper compartment 11. ECR software / EJ electronic journal 17. Power supply port 6. Receipt output 12. ETHERNET port 12 BIG II TOUCH S User Manual... -
Page 13: Turn On The Cash Register
The register will display the “REDO” message ATTENTION: Insert the power supply in the housing Use the type of electrical power supply indicated by widening the locking tooth B on the device label. BIG II TOUCH S 13 User Manual... -
Page 14: Connect The Control Box
3. Set the COM1 port confi guration: Note: Set the same baud rate as the Control Box. Set the fl ow control on the Control Box as RTS/ CTS or HARDWARE. 9. Perform a fi nancial zero report: 14 BIG II TOUCH S User Manual... - Page 15 15. Select the number of active lines for receipt header (from 1 to 6). KASSA AKTIVERAD NAMN KASSA: AA ORGANISATIONSNUMMER MASKINNUMMER: 1 0000000000 KONTROLLENHET: ABCDE000000001234 01/01/12 12:00 OP.T.#2 16. Type the Corporate ID number and press the ENTER key to confi rm. BIG II TOUCH S 15 User Manual...
-
Page 16: Connection
Connectivity with other devices is ensured by the interfaces of the cash register. Cable supplied with CUSTOM cash drawer ETHERNET UTP standard cable (pin to pin) ETHERNET CrossOver standard cable USB standard cable 16 BIG II TOUCH S User Manual... - Page 17 To correctly set the communi- cation ports enter the menu FUNKTIONER > PROGRAM- MERING > ARBETS INSTÄLLN (see Chap. PERSONALIZATION). COM2 COM1 CB9POLI-PLUG8-01 CB9POLI-PLUG8-10 Connection cable for PC Connection cable for optical reader BIG II TOUCH S 17 User Manual...
-
Page 18: Paper Load
Lift the opening lever A. Pull the paper until it comes out a few centimetres and close the cover. ROOM Open the cover for the paper compartment B. The paper is automatically loaded. 18 BIG II TOUCH S User Manual... -
Page 19: Electronic Journal Replacement
• Enter the “NY E-J INIT.” mode: • Confi rm with the ENTER key: Note: The steps above are also shown on the display and printed on a NOT-FISCAL receipt (see fi gure). BIG II TOUCH S 19 User Manual... -
Page 20: Cleaning
NAMN KASSA: AA MASKINNUMMER: 1 Switch off the device. KONTROLLENHET: ABCDE000000001234 01/01/12 12:00 OP.T.#1 Disconnect the power cable from the network. Alcohol, solvent cohol, solve Clean the device by using a soft cloth. 20 BIG II TOUCH S User Manual... - Page 21 Do not let water or other liquids get inside the de- vice. Alcohol, solvent cohol, solve Gently wipe the screen with a non-abrasive cloth Switch off the device. slightly moistened with water. BIG II TOUCH S 21 User Manual...
-
Page 22: Touch Screen Calibration Procedure
Switch OFF the device. KASSAN STARTAR VÄNLIGEN VÄNTA... Lift the opening lever A. Open the cover for paper compartment B and, if necessary, move the paper C to release the sensor surface. 22 BIG II TOUCH S User Manual... - Page 23 2. INSTALLATION AND USE INGET PAPPER ELLER LUCKAN ÖPPEN ÄNG LUCKAN ÖR KALIBRERING TRYCK PÅ ÄRMEN BIG II TOUCH S 23 User Manual...
- Page 24 2. INSTALLATION AND USE 24 BIG II TOUCH S User Manual...
-
Page 25: Connections
The device is equipped with a USB type B connector for The cash drawer is used for storage and movement of connecting to an external device or a PC (optional cable). cash and/or equivalent qualifi cations such as checks, ticket restaurant, etc. BIG II TOUCH S 25 User Manual... -
Page 26: Com1 / Com2 Serial Connectors
Use an Ethernet cross-over type cable to connect the printer directly to a personal computer. • Use an Ethernet UTO (pin to pin ) cable to connect the CASH printer directly to a HUB device. REGISTER 26 BIG II TOUCH S User Manual... -
Page 27: Display
Artikel 8 10 12 14 16 18 20 22 24 C 0 00 C 0 00 C 0 00 Kontant Kontant Kontant DAGLIGT NETTO Kr: 43,83 C.I.D. Kr: 40,83 Pan2 Pan3 Pan4 Pan5 BIG II TOUCH S 27 User Manual... -
Page 28: Key Functions
In “normal” mode allows you to enter one of the numeric character shown at the top. In the FUNCTION menù allows you to enter one of the alphanumeric characters shown in the bottom. Repeatedly press a button to scroll through the character set. 28 BIG II TOUCH S User Manual... -
Page 29: Customer Side Display And Operator Side Display
To exit from this mode, switch off the device, ensure that the fi scal journal is properly inserted and switch back on the device without pressing the touch screen. Wait for the message REDO to appear on the display. BIG II TOUCH S 29 User Manual... - Page 30 4. KEYBOARD AND DISPLAY 30 BIG II TOUCH S User Manual...
-
Page 31: Operating Sequence
If you type the amount followed by the department key, this price is added to the transaction For example, to sell DEPARTMENT 1 with a free price: • Enter the amount from numeric keypad followed by the DEPARTMENT key: BIG II TOUCH S 31 User Manual... -
Page 32: Plu
For example, to sell PLU1 with a free price: • Enter the amount from numeric keypad followed by the PLU key: The PLU1 is added with price of 100.00 kronas. The sys- tem issue the following receipt: 32 BIG II TOUCH S User Manual... -
Page 33: Plu Code" Key
PLU with the price typed. For example, to sell PLU1 with a free price proceed as follow: • Enter the amount from numeric keypad followed by the PRICE key. • Enter the PLU using the PLU CODE key: BIG II TOUCH S 33 User Manual... -
Page 34: Department Code" Key
For example, to sell DEPARTMENT 1 with a free price proceed as follows: • Enter the amount from numeric keypad followed by the PRICE key: • Enter the DEPARTMENT using the DEPARTMENT CODE key: 34 BIG II TOUCH S User Manual... -
Page 35: Single Key
Note: To personalize the Departments archive enter the FUNKTION > PROGRAMMERING > VARUGRUP- PER menu. To personalize the PLU archive enter the FUNKTION > PROGRAMMERING > ARTIKEL/PLU (see Chapter 11). BIG II TOUCH S 35 User Manual... - Page 36 5. OPERATING SEQUENCE 36 BIG II TOUCH S User Manual...
-
Page 37: Corrections
“TRANSAKTICNEN ANNULLERAS” will be printed. <Company Name> • Use the “arrow” key to select the item to cancel: <Company Name> <Address> <Location> <Telephone - Fax> 1 ARTIKEL 1 20,00 C NOLLAD TRANSAKTION -20,00 BIG II TOUCH S 37 User Manual... -
Page 38: Return Ticket
12:00 T.#1 Note: As provided by the tax law, a return can not perform a negative total for the transaction. In practice, you can not close the transaction if the total is negative. 38 BIG II TOUCH S User Manual... -
Page 39: Percentage Discount
60.00 kronas): • Or give a free percentage discount (ex 33%): • Perform the calculation of the subtotal: • Continue with the sale or close with a payment key (ex. CASH key). BIG II TOUCH S 39 User Manual... -
Page 40: Percentage Extra Charge
VÄXEL 0,00 C:MOMS 12% (12,00%) 16,39 TOTAL NETTO 136,61 NAMN KASSA: AA • Continue with the sale or close with a payment key MASKINNUMMER: 1 (ex. CASH key). KONTROLLENHET: ABCDE000000001234 01/01/12 12:00 T.#1 40 BIG II TOUCH S User Manual... - Page 41 17,00 C TOTAL Kr 187,00 KONTANT 187,00 VÄXEL 0,00 C:MOMS 12% (12,00%) 20,04 TOTAL NETTO 166,96 NAMN KASSA: AA MASKINNUMMER: 1 • Perform the calculation of the subtotal: KONTROLLENHET: ABCDE000000001234 01/01/12 12:00 T.#1 BIG II TOUCH S 41 User Manual...
-
Page 42: Rebate
Continue with the sale or close with a payment key (ex. CASH key). Note: A rebate, can not make the negative value of a transaction. If you enter an amount greater than the subtotal, the operation produces status signalling. 42 BIG II TOUCH S User Manual... -
Page 43: Payments
• To close and charge the amount on credit press the key: Note: Payments 22 to 30 are programmable only by using the “FISCAL SUITE” software. BIG II TOUCH S 43 User Manual... -
Page 44: Cash
1 VARUGRUPP 002 80,00 C 5 VARUGRUPP 005 50,00 C TOTAL Kr 130,00 KONTANT 130,00 VÄXEL 0,00 C:MOMS 12% (12,00%) 13,93 TOTAL NETTO 116,07 NAMN KASSA: AA MASKINNUMMER: 1 KONTROLLENHET: ABCDE000000001234 01/01/12 12:00 T.#1 44 BIG II TOUCH S User Manual... -
Page 45: Cheque
C:MOMS 12% (12,00%) 13,93 TOTAL NETTO 116,07 C:MOMS 12% (12,00%) 13,93 TOTAL NETTO 116,07 NAMN KASSA: AA MASKINNUMMER: 1 NAMN KASSA: AA KONTROLLENHET: ABCDE000000001234 MASKINNUMMER: 1 01/01/12 12:00 T.#1 KONTROLLENHET: ABCDE000000001234 01/01/12 12:00 T.#1 BIG II TOUCH S 45 User Manual... -
Page 46: Cheque With Change Calculation
KONTROLLENHET: ABCDE000000001234 01/01/12 12:00 T.#1 ATTENTION: If the cash drawer contains an amount • Finish by pressing the payment key: less than the change, the display shows the mes- sage “UTBETALNING FÖR STOR”. 46 BIG II TOUCH S User Manual... -
Page 47: Credit Card
C:MOMS 12% (12,00%) 13,93 C:MOMS 12% (12,00%) 13,93 TOTAL NETTO 116,07 TOTAL NETTO 116,07 NAMN KASSA: AA NAMN KASSA: AA MASKINNUMMER: 1 MASKINNUMMER: 1 KONTROLLENHET: ABCDE000000001234 KONTROLLENHET: ABCDE000000001234 01/01/12 12:00 T.#1 01/01/12 12:00 T.#1 BIG II TOUCH S 47 User Manual... -
Page 48: Generic Payments
20 + OTHER PAYMENTS key. • Enter the items of the transaction (ex. DEP2 with free price of 80.00 kronas, No.5 DEP5 with preset price 10.00 kronas): • Finish by pressing the payment key (ex. PAYMENT No.10): 48 BIG II TOUCH S User Manual... -
Page 49: Lunch Voucher
PRICE key: 01/01/12 12:00 T.#1 • Finish by pressing the payment key: • This message appears on the display: LUNCHKUPONG 200.00 • The display will show the change to give (after print- out): BIG II TOUCH S 49 User Manual... -
Page 50: Mixed Payment
• To know the amount remaining to close the transac- VÄXEL 00,00 tion press the key: C:MOMS 12% (12,00%) 13,93 TOTAL NETTO 116,07 NAMN KASSA: AA MASKINNUMMER: 1 KONTROLLENHET: ABCDE000000001234 01/01/12 12:00 T.#1 50 BIG II TOUCH S User Manual... -
Page 51: Extra Functions
80.00 kronas, No.5 DEP5 with preset price 10.00 kronas): C:MOMS 12% (12,00%) 13,93 TOTAL NETTO 116,07 NAMN KASSA: AA MASKINNUMMER: 1 KONTROLLENHET: ABCDE000000001234 01/01/12 12:00 T.#1 • Type the not-summing number (ex. 12345) and press the SUBTOTAL key: BIG II TOUCH S 51 User Manual... -
Page 52: Operator Selection
To disable the operator and eliminate the indication on the ticket at the beginning of a transaction, type the keys: • Enter the items of the transaction (ex. DEP3 with preset price 20.00 kronas): 52 BIG II TOUCH S User Manual... -
Page 53: Department Price Query
This message appears on the display: • This message appears on the display: VARUGRUPP 080 ARTIKEL 080 1,00 1,00 • The “Department price query” mode automatically is • The “PLU price query” mode automatically is disabled. disabled. BIG II TOUCH S 53 User Manual... -
Page 54: Credit Note
Note: The device assigns to each Credit Note a progres- sive number that will be shown under the heading of the receipt. At the closing of Credit Note, the sequence number is set free. • Close the transaction with a payment key: 54 BIG II TOUCH S User Manual... -
Page 55: Virtual Receipt Display
Sub TL 1 VARUGRUPP 001 1.00 ,:;’?+- D.L. Ins. • Select the part of electronic journal (ex. ALL): Kontant Kontant Spc=/%@ Spc=/%@ _#( ) _#( ) Enter Enter Pan1 Pan2 Pan3 Pan4 Pan5 BIG II TOUCH S 55 User Manual... -
Page 56: Virtual Calculator
TJÄNSTER - ANTAL 0.000 ,:;’?+- D.L. Ins. INGEN FÖRS KVITTO NR KUNDER DAGLINGEN Kontant ontant FRAMÅ Å Spc=/%@ Spc=/%@ _#( ) _#( ) Enter nter n te Pan1 Pan2 Pan3 Pan4 Pan5 Pan5 NEXT PAGE 56 BIG II TOUCH S User Manual... - Page 57 Note: If not present in the keybord, you can insert the “DISPLAY RECEIPT” key by using the “Keyboard Confi gurator” section of the “FISCAL SUITE” software. BIG II TOUCH S 57 User Manual...
- Page 58 8. EXTRA FUNCTIONS 58 BIG II TOUCH S User Manual...
-
Page 59: Special Functions
Confi gurator” section of the “FISCAL SUITE” software. • Type in the amount to recovery (ex. 500.00 kronas): • Press the key for the payment type (ex. CASH key, see Chap. PAYMENTS). The system prints a not- fi scal receipt: BIG II TOUCH S 59 User Manual... -
Page 60: Received In Account
Receiving in account are not allowed with transaction in progress. • This message appears on the display: VÄXELKASSA • Type in the amount (example 100.00 kronas). • Confi rm with the ENTER key: 60 BIG II TOUCH S User Manual... -
Page 61: Paid Out
If the cash drawer contains an amount less than the levy imposed, the display shows the message “NOT ENOUGH CASH”. • Confi rm with the ENTER key: Note: The closure is allowed only by payment in cash. BIG II TOUCH S 61 User Manual... - Page 62 9. SPECIAL FUNCTIONS 62 BIG II TOUCH S User Manual...
-
Page 63: Reports/Zero Reports
Sales activity performed in each PLU from the last data from the last resetting performed on the same issued report. OPERATORS Activity of all operators HISTORICAL OPERATORS Operators activity from the last data from the last resetting performed on the same issued report. BIG II TOUCH S 63 User Manual... - Page 64 Use the arrow keys to browse within the menu and • Use the arrow keys to browse within the menu and press the ENTER key to select the type of report: press the ENTER key to select the type of zero report: 64 BIG II TOUCH S User Manual...
- Page 65 10,00 C TOTAL Kr 110,00 KONTANT 50,00 LUNCHKUPONGER 60,00 VÄXEL 0,00 Note: The following sample reports are used as an illus- trative examples. They couldn’t reproduce the described device faithfully. C:MOMS 12% (12,00%) 11,79 BIG II TOUCH S 65 User Manual...
-
Page 66: Sample Report Of The Electronic Journal
110,00 KONTANT 50,00 LUNCHKUPONGER 60,00 VÄXEL 0,00 C:MOMS 12% (12,00%) 11,79 TOTAL NETTO 98,21 NAMN KASSA: AA MASKINNUMMER: 1 KONTROLLENHET: ABCDE000000001234 01/01/12 12:05 T.#2 UIFDGASF8GSDA88GF2EYQE17BNU8BIANO; D13IFADDSADSAVFS RETURKVITTO NUM.1 1 VARUGRUPP 002 200,00 C 66 BIG II TOUCH S User Manual... -
Page 67: Sample Financial Report
NAMN KASSA: AA KREDIT MASKINNUMMER: 1 50,00 KONTROLLENHET: ABCDE000000001234 ==================================== 01/01/12 12:00 OP.T.#1 KUND SALDO 0,00 SALDO KREDITER 500,00 ==================================== KVITTON DAGLIGEN 230,00 KREDITKVITTON DAILY 50,00 KVITTOKOPIOR 0,00 ÖVNINGSKVITTON 0,00 ANULLERINGAR 0,00 RETURKVITTON BIG II TOUCH S 67 User Manual... -
Page 68: Sample Plu Report
MASKINNUMMER: 1 ANTAL KONTROLLENHET: ABCDE000000001234 BRUTTO TOTAL Kr -180,00 01/01/12 12:00 OP.T.#1 -600,00% ==================================== KUNDER ANTAL BRUTTO TOTAL Kr 30,00 FÖRSÄLJ ARTIKAL Kr 10,00 NAMN KASSA: AA MASKINNUMMER: 1 KONTROLLENHET: ABCDE000000001234 01/01/12 12:00 OP.T.#1 68 BIG II TOUCH S User Manual... -
Page 69: Sample Users Report
BRUTTO TOTAL Kr -90,00 MASKINNUMMER: 1 C.I.D. Kr -150,00 KONTROLLENHET: ABCDE000000001234 KONTANT 01/01/12 12:00 OP.T.#1 60,00 ==================================== KUNDER BRUTTO TOTAL Kr 30,00 C.I.D. Kr -150,00 NAMN KASSA: AA MASKINNUMMER: 1 KONTROLLENHET: ABCDE000000001234 01/01/12 12:00 OP.T.#1 BIG II TOUCH S 69 User Manual... -
Page 70: Multiple Zeroings
Confi rm with the ENTER key: • The device starts the sequence of selected zeroings. Note: To choose the zeroing sequence enter the follow- ing menu: FUNKTION > PROGRAMMERING > FLERA NOLLNINGAR (see Chap. PERSONALIZATION). 70 BIG II TOUCH S User Manual... -
Page 71: Personalization
See the menu structure in the last pages of this manual. ATTENTION: CHANGES TO PAYMENTS AND VAT BECOME EFFECTIVE ONLY AFTER MAKING A FINANCIAL ZEROING. CHANGES TO HEADERS BECOME EFFECTIVE ONLY AFTER MAKING A DAILY ZEROING BIG II TOUCH S 71 User Manual... -
Page 72: Description Of Programmable Options
Department that is associated with the PLU YES = After selecting the PLU, the device closes the transaction with cash Single item NO = After selecting the PLU, the device waits for the successive sales 72 BIG II TOUCH S User Manual... - Page 73 Maximum percent value for free discount/extra charge Value % Preset percent value for free discount/extra charge VAT RATES Tax code Location in memory to associate the VAT rate Caption VAT rate description Value Percent value for VAT rate BIG II TOUCH S 73 User Manual...
- Page 74 DATE AND TIME Date setting Date [yymmdd] ATTENTION: fi eld modifi able only after a fi scal zeroing. Time setting Time [hhmm] ATTENTION: fi eld modifi able only after a fi scal zeroing. 74 BIG II TOUCH S User Manual...
- Page 75 YES = Enable automatic use of commas with to 2 decimal digits Price in cents NO = Disable displaying and printing of value with 2 decimal digits Kassanummer ID number for the cash register (1 ÷ 999) BIG II TOUCH S 75 User Manual...
- Page 76 YES = Enable the cash drawer opening at the end of each transaction Aut.opening c.drawer NO = Disable the cash drawer opening at the end of each transaction 18 V Cash drawer voltage 12 V 24 V 76 BIG II TOUCH S User Manual...
- Page 77 YES = Enable the printing of the Subtotal before a discount on SBTL or before an extra charge on SBTL NO = Disable the printing of the Subtotal before a discount on SBTL or before an extra charge on SBTL BIG II TOUCH S 77 User Manual...
- Page 78 11. PERSONALIZATION Print density Print density adjustment (use arrows keys) HIGH Print speed NORMAL 78 BIG II TOUCH S User Manual...
-
Page 79: Programming Keyboard Style
FÄRG PÅ KNAPP BLÅ • Use the “arrow” key to select the colour for the key (ex. GREEN ) and confi rm with the ENTER key: • Confi rm with the ENTER key: BIG II TOUCH S 79 User Manual... -
Page 80: Set Contrast Level
Exit the PROGRAMMING menu and the key change in this way: • Enter the password: • This message appears on the display: KONTRAST [1-100] • Type a different value for the contrast level (ex. 80): 80 BIG II TOUCH S User Manual... -
Page 81: Service
(42 characters) KVITTOHUVUD 5/6 (5 line) (42 characters) KVITTOHUVUD 6/6 (6 line) (42 characters) RADER KVITTOHUVUD • Enter the password: Select number of line for receipt header. ORGANISATIONSNUMMER Company ID number (10 Characters) BIG II TOUCH S 81 User Manual... -
Page 82: Change Password
THIS PART IS RESERVED EXCLUSIVELY TO • Re-enter the new password (ex 12345): TECHNICAL SERVICE To change password proceed as follows: • Enter the procedure for changing password: • The password is changed. 82 BIG II TOUCH S User Manual... -
Page 83: Saving Archives (Backup Flash --> Mmc)
This operation takes a few seconds as indicated by the RESTORE MMC->FLASH loading bar on the display: █ █ █ █ █ █ █ █ BACKUP FLASH->MMC █ █ █ █ █ █ █ █ BIG II TOUCH S 83 User Manual... -
Page 84: Upgrade With Device Closed
Note: Copy the upgrade fi les on an MMC. Local disk (C:) • Eject the electronic journal on the machine: FLASH DRIVE DGFE • The printer automatically restarts. • Perform an Hard Initialization. 84 BIG II TOUCH S User Manual... -
Page 85: Upgrade With Device Open
fi rmware update is not formatted but can be used to update other devices. • Turn the machine OFF • Remove the jumper JP1 on the control board to disa- ble UPGRADE mode. • Perform an Hard Initialization. • Ri-assemble the device. BIG II TOUCH S 85 User Manual... - Page 86 12. SERVICE 86 BIG II TOUCH S User Manual...
-
Page 87: Functions Codes
Format NVRam disk and lost the related content (Counter.db) Check the EJ status 1477 (1 = Ok, more than 1 = Not Ok) Enable additional log messages 1500 (1 = Custom protocol, 2 = SQLite operations, 4 = Counters mismatch) BIG II TOUCH S 87 User Manual... - Page 88 RAPPORTER [1006] Menu structure FINANSIELL [1051] HISTORISK FINANSIELL [1063] TIDSINTERVALL [1064] HISTORISKT TIDSINTER [1065] VARUGRUPPER [1052] ANGE VARUGRUPPER [1066] HISTORISKA VARUGRUP. [1067] ARTIKEL/PLU [1053] ANGE ARTIKEL/PLU [1054] HISTOR. ARTIKAL/PLU [1068] OPERATORER [1055] HIST. OPERATÖRER [1069] ELEKTRONISK JOURNAL [1062] Z NOLLNINGSRAPPORTER [1007] FINANSIELL [1101] HISTORISK FINANSIELL...
- Page 89 VARUGRUPPER ÄNDRA [1200] VARUGRUPPER ADDERA [1201] KOD VARUGRUPP RADERA [1202] TEXT MÄRKING PÅ KNAPP ARTIKEL/PLU PRIS 1 ÄNDRA [1210] PRIS 2 ADDERA [1211] PRIS 3 RADERA [1212] MIN PRIS MAXPRIS OPERATORER MOMSSATS ÄNDRA [1230] VARUGR. ADDERA [1231] TJÄNST RADERA [1232] RABATTERBARA KVANTITETSKRAV BETALNING...
- Page 92 CUSTOM ENGINEERING S.p.A. World Headquarters Via Berettine, 2 - 43010 Fontevivo, Parma ITALY Tel. +39 0521 680111 - Fax +39 0521 610701 info@custom.biz - www.custom.biz All rights reserved www.custom.biz...
Need help?
Do you have a question about the BIG II Touch S and is the answer not in the manual?
Questions and answers