Connecting The Ac Power Adapter; Connecting The Din Cable; Subscribing To The Sirius Service - Sirius Satellite Radio SUHC1 Installation Manual

Sirius universal connect home kit
Table of Contents

Advertisement

Connecting the AC Power Adapter

Connect the AC Power Adapter to the DC5V connector at the rear of the universal connect
home dock (refer to Figure 1 on page 7), and plug it into a wall outlet.

Connecting the DIN Cable

Connect one end of the provided DIN cable to the DIN connector at the rear of the universal
connect home dock (refer to Figure 1 on page 7), and connect the other end to the SIRIUS
DIN connection of your receiver. (Figure 5)
If audio input is not supported via the DIN cable connection of your SIRIUS ready receiver,
you will need to connect an audio cable from the AUDIO OUT connector of the universal
connect home dock to your receiver. (You will need to purchase the appropriate cable sepa-
rately.)

Subscribing to the SIRIUS Service

Before you can listen to the SIRIUS service, you need to subscribe to the SIRIUS Satellite
Radio service. To subscribe, do the following:
1.
Be sure that the SIRIUS radio is correctly installed as described in this manual, is in the
universal connect home dock, and that the antenna is oriented to receive the SIRIUS
signal.
[
]
12
Installation
Figure 5
Figure 5
SIRIUS READY

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents