Danish Interpretation Systems List of Contents List of Contents... 3 Document version... 3 Important ... 4 Compliancy ... 4 Installation precautions ... 4 Cleaning ... 4 Repacking... 4 Warranty... 4 Description of the DCS 6000 system ... 5 Features... 5 System components ...
Danish Interpretation Systems Important Compliancy The equipment has been tested and found to comply with the limits of the following standards for digital devices: EN55103-1 (Emission) EN55103-2 (Immunity) FCC rules part 15, class A (Emission) This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference...
Danish Interpretation Systems Description of the DCS 6000 system Features The DCS 6000 system has the following main features: Fully digital Excellent sound quality “State of the Art” fully digital integrated interpretation, discussion and voting system offering interpretation, language distribution, conference microphone and voting facilities with attendance check with Chip Card ™.
Danish Interpretation Systems System components The CU 6010 Central Unit supports all available units in the DCS 6000 series: Central equipment CU 6010 Central Unit EX 6010 Extension Power Unit PS 6000 Power Supply RP 6004 Repeater for four chains AO 6008 Audio Output box JB 6002...
Danish Interpretation Systems Operating instructions RP 6004 Repeater General description The RP 6004 Repeater provides repeater and splitter functionality for the DCS 6000 system. One CU 6010 Central Unit is needed in each DCS 6000 system, however for expansion of the system the RP 6004 Repeater is suitable.
Danish Interpretation Systems Power LED Those LED light up when Power is available on the connector next to the LED System design There are no settings to be done on the RP 6004 Repeater. However it is important to observe, that the unit is only repeating one of the chains on the CU 6010 Central Unit.
Page 9
Danish Interpretation Systems User Manual ‘Loop through’ connector When connecting a number of RP 6004 Repeaters to the CU 6010 an almost unlimited number of RP 6004 can be connected by using the ‘Loop through’ connector. The practical limitation is the maximum cable length in one chain, which is 200 m and supply of power to the RP 6004 repeaters.
Danish Interpretation Systems System Setup General guidelines Connect the RP 6004 to the various units using Cat 5 FTP or STP cables. Please observe the following guide lines: Maximum cable length in one chain is 200 without repeater. interconnection cables between the units. The max.
Danish Interpretation Systems User Manual Typical schematics The following schematics are showing various configurations : Large sized conference microphone system Manual 01 18 04466...
Danish Interpretation Systems Technical appendix Cabling CAT5 The DCS 6000 system uses CAT5, CAT5e or CAT6 FTP or STP cables with screened RJ45 connectors. It is important to use only FTP or STP (screened) cables and screened RJ45 connectors and not UTP cable, which is unscreened. EIA 568-B wiring shall be used.
Page 14
Danish Interpretation Systems User Manual Manual 01 18 04466...
Need help?
Do you have a question about the Repeater RP 6004 and is the answer not in the manual?
Questions and answers