Table of Contents
Advertisement
camera operation
-
EXTERN : Ground to the grounding terminal to allow automatic switching between
-
COLOR : The picture is always displayed in color.
-
B/W : The picture is always displayed in black and white.
DEfog : Y ou can use the defog mode to allow the camera to automatically
❶
If the SPECIAL menu screen is displayed, use the Function Setup switch so that
the arrow indicates 'DEFOG'.
❷
Select a desired mode using the Function Setup switch.
-
AUTO : Adjust the level automatically.
-
Manual : Depending on the defog
-
OFF : Released state
M
If the defog mode is set to Auto, and if the amount of fog is reduced, the function level will be
also reduced. If you want to maintain the same level of defogging, set it to Manual.
If there is little fog and the manual fog level is high, the screen contrast can get high.
PriVaCY : M ask an area you want to hide on the screen.
❶
If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
'PRIVACY'.
❷
Select a desired mode using the
Function Setup switch.
-
AREA : You can select up to 24
-
MODE : Determines whether to use the
-
MASK COLOR : Determine area color. You can select Green, Red, Blue, Black, White, Gray.
-
TRANSPARENCY : Adds or removes transparency from the masking area.
2_ camera operation
COLOR and B/W (Black/White).
You can turn on or off the burst signal on B/W mode.
detect the fog density of the screen and display a clear image despite
smog, fog or general poor visibility.
level set by the user,
adjust the clarity of image.
(LOW, MIDDLE, HIGH)
PRIVACY areas.
area selected in the AREA.
DEFOG MANUAL SETUP
LEVEL
▶
1.
RETURN
2.
PRIVACY AREA SETUP
AREA
▶
1.
MODE
2.
MASK COLOR
3.
TRANSPARENCY
4.
SEL POS
5.
X POS
6.
Y POS
7.
RETURN
8.
MIDDLE
AREA
1
OFF
GREEN
OFF
L_TOP
--------
18
33
-
-------
Hide quick links:
Advertisement
Table of Contents
