Advertisement
Remote Control System
1
2
3
4
Battery Installation
Since the remote control will be used for many units to control operations, you should begin by installing
the supplied battery:
1. Turn the remote control over and pull out the battery compartment cover.
2. Insert the battery according to the battery compartment.
3. Close the battery compartment cover.
4. Test the unit by pressing Mute or any mode key. If the battery is inserted correctly, the system will
response to the instruction.
Note
Do not leave the remote control in an extremely hot or humid place.
Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a
malfunction.
If you do not intend to use the remote control for an extended period of time, remove the batteries to
avoid possible damage from battery leakage and corrosion.
If you find that the remote control can be used at a normal distance to the main unit, then the battery
could be weak, so you need to replace the battery with a new one.
If battery leak, remove it immediately, and properly dispose it. Avoid touching the leaked material and
splashing it to clothing, etc. Clean the battery compartment thoroughly before installing new battery.
1.Sleep mode control selector
2.Input mode control selector
3.Bass volume adjust selector
5
4.Tuner control area
6
5.Bluetooth control area selector
7
6.Mute control selector
8
7.Treble volume adjust selector
8.Subwoofer volume adjust selector
5
Advertisement
