Download Print this page

AOR AR1000 Instruction Manual page 4

Wide range portable monitar receiver
Hide thumbs Also See for AR1000:

Advertisement

11.
AM/FM key. Selects either mode as required.
12.
W-FM key. Selects either W(wide)FM or narrow FM as required.
13.
LOCKOUT key. Press once to lockout the channel or frequency show
on the display.
14.
DELAY/HOLD key. Press to change from
DELAY
to
HOLD
and back again
sequentially in both search and scan mode. When
"HOLD"
is shown on the
display, the scan or search stops on a busy channel and remains there
even after the signal has gone off. When
I1DELAY"
is shown on the
display, the scan or each stops on a busy channel, but then
automatically resumes the search or scan approximately
2
seconds aft
the signal has gone off.
15.
Down arrow key Initially, the search or scan action is always from
lower frequencies to hiqher, or lower memory channels to higher. If
when searching or scanning, the down arrow key is pressed, the search
or scan stops, and the down arrow mark is shown on the display.
Subsequent short press of the down arrow key will step the scan or
search downwards. If the down arrow key is held pressed for more than
about one seconds, the scan or search will re-start, but in the
downwards direction.
16.
KEY LOCK key. Press this key to disable all keyboard function.
Press again to restore all function to normal. This key is used to
prevent accidental mis-operating or changes of frequency when the
receiver is being carried around but still in use, for example at air
displays.
17.
LIGHT key. Pressed momentarily, this will illuminate the display
for approximately six seconds, after which the lamp will automatically
be extinguished.
Manual O~eration
1.
To enter frequenc
MANUAL
-
(frequency xn
MHz)
-
ENTER
2.-
To enter tuning steps
INC
-
(tuning step in
KHz)
-
ENTER
To enter receiving mode
AM (or FM, or W.FM)
-
ENTER
3.
To tune receiver
Use main tuning knob. Display will show up arrow or down arrow mark as
you tune up or down in steps previously entered.
Page
3

Advertisement

loading