Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Using an engine indoors
CAN KILL YOU IN MINUTES.
Engine exhaust contains carbon monoxide.
This is a poison you cannot see or smell.
NEVER use inside
a home or garage,
EVEN IF doors and
windows are open.
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
REV 14l
Email our engine support at: predator@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2012 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Only use OUTSIDE
and far away from
windows, doors,
and vents.
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
ITEM 60622
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Predator 60622
Summary of Contents for Predator 60622
- Page 1 Email our technical support at: productsupport@harborfreight.com ITEM 60622 REV 14l Email our engine support at: predator@harborfreight.com When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.
-
Page 2: Table Of Contents
0.26 Gallons Recommended Gear Oil SAE 80-90 Weight Gear Oil NGK BPM7A Bosch WS7F Compatible Champion CJ7Y Spark Types Torch L7T Plug (resistive plugs only) 0.028~0.031″ Drilling Speed 150 RPM Page 2 For technical questions, please call 1-888-866-5797. ITEM 60622... -
Page 3: Specifications
3. Operation of this equipment may create sparks that can start fires around dry vegetation. A spark arrestor may be required. The operator should contact local fire agencies for laws or regulations relating to fire prevention requirements. ITEM 60622 For technical questions, please call 1-888-866-5797. Page 3... -
Page 4: Operating Precautions
17. Never store fuel or other flammable intended could result in a hazardous situation. materials near the Engine. 34. Do not operate the Auger with known leaks in the Engine’s fuel system. Page 4 For technical questions, please call 1-888-866-5797. ITEM 60622... - Page 5 Harbor Freight Tools for a replacement. to evaporate before starting Engine. To prevent FIRE, do not start the Engine while the smell of fuel hangs in the air. SAVE THESE INSTRUCTIONS. ITEM 60622 For technical questions, please call 1-888-866-5797. Page 5...
-
Page 6: Setup
SAE 80-90 gear oil in its Gearbox. Do not run the Auger with low or no gear oil. Running the Auger with low or no gear oil will permanently damage the unit. Page 6 For technical questions, please call 1-888-866-5797. ITEM 60622... - Page 7 Components and Controls power Safety Handle Switch Switch Throttle Fuel Tank Choke Starter Handle primer Figure A ITEM 60622 For technical questions, please call 1-888-866-5797. Page 7...
-
Page 8: Operation
It can To prevent FIRE, do not start the Engine cause particles to enter the carburetor, affecting while the smell of fuel hangs in the air. Engine performance and/or causing damage. Page 8 For technical questions, please call 1-888-866-5797. ITEM 60622... - Page 9 1. Insert the shank of the Bit fully upward into the 2. Secure the Bit in the Transmission Transmission Socket on the bottom of the Auger. Socket, using the Pin and R-Pin. ITEM 60622 For technical questions, please call 1-888-866-5797. Page 9...
-
Page 10: Operating Instructions
Starter Handle Figure C: primer Figure D: Starter Handle 3. Set the Choke (see Figure E): Closed (Up) if the Engine is cold. Open (Down) if the Engine is warm. Page 10 For technical questions, please call 1-888-866-5797. ITEM 60622... - Page 11 Throttle. Then, slide the Power Switch to the O position. WARNING! Keep your thumb near the power Switch so the Auger can be stopped immediately in an emergency. (See Figure F.) ITEM 60622 For technical questions, please call 1-888-866-5797. Page 11...
-
Page 12: Maintenance
3. Remove the Air Filter element. 6. Install the cleaned filter in reverse order of removal. Secure the Air Filter Cover before use. Page 12 For technical questions, please call 1-888-866-5797. ITEM 60622... - Page 13 For Engine starting instructions refer c. Replace spark plug, but leave to "Operating Instructions" on page 10 . spark plug cap disconnected. ITEM 60622 For technical questions, please call 1-888-866-5797. Page 13...
-
Page 14: Troubleshooting
Allow gearbox to completely cool. hot to the touch Then, fill gearbox with SAE 80-90 gear oil. Follow all safety precautions whenever diagnosing or servicing the Auger or Engine. Page 14 For technical questions, please call 1-888-866-5797. ITEM 60622... - Page 15 5. Intake valve stuck, choke stuck, 5. Have qualified technician incorrect timing, clogged carburetor, diagnose and service Engine. or overheated Engine. Follow all safety precautions whenever diagnosing or servicing the Auger or Engine. ITEM 60622 For technical questions, please call 1-888-866-5797. Page 15...
-
Page 16: Parts Lists And Diagrams
Bolt (M5 x 20) Wire Clip Fuel Tank Piston Pin Packing Ring Piston Pin Circlip Intake Strut Piston Intake Piston Pin Fuel Cap Crankcase Gasket Fuel Cap Set Piston Ring Primer Cylinder Gasket Page 16 For technical questions, please call 1-888-866-5797. ITEM 60622... - Page 17 Engine Assembly Diagram ITEM 60622 For technical questions, please call 1-888-866-5797. Page 17...
- Page 18 Lining (not shown) Transmission Socket R-Pin Washer Fuel Mix Container Gasket Hex Wrenches Gearbox Cover Open End Wrench Oil Seal (20 x 35 x 7) Spark Plug Socket Oil Fill Plug Screwdriver Page 18 For technical questions, please call 1-888-866-5797. ITEM 60622...
- Page 19 Assembly Diagram A - Auger 37a 38a ITEM 60622 For technical questions, please call 1-888-866-5797. Page 19...
- Page 20 Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 20 For technical questions, please call 1-888-866-5797. ITEM 60622...
- Page 21 Assembly Diagram B - Frame ITEM 60622 For technical questions, please call 1-888-866-5797. Page 21...
-
Page 22: Warranties
(2) years. If any emission-related part on your engine is warranty rights and responsibilities, you should defective, the part will be repaired or replaced by HFT. contact the Harbor Freight Tools Customer Service Department at 1-888-866-5797. Page 22 For technical questions, please call 1-888-866-5797. ITEM 60622... - Page 23 Owner’s Manual Improper or inadequate maintenance of any warranted parts Repairs performed outside of the authorized warranty service dealers Alterations by changing, adding to or removing parts from the engine. ITEM 60622 For technical questions, please call 1-888-866-5797. Page 23...
- Page 24 3491 Mission Oaks Blvd. • pO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797...
Need help?
Do you have a question about the 60622 and is the answer not in the manual?
Questions and answers
need a bolt for the prime button bracket
The bolt size for the Predator 60622 prime button bracket is M12 x 20.
This answer is automatically generated