1. Manuals
  2. Brands
  3. watt box Manuals
  4. Surge Protector
  5. WB-200-IPCE-3
  6. Owner's manual

watt box WB-200-IPCE-3 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

KEY FEATURES
Surge Protection with Fireproof MOVs - Advanced Ceramic MOV technology reduces risk of fire from surges.
Surge Disconnect - In the event of a catastrophic surge event, this Wattbox™ component will sacrifice itself and permanently
disconnect AC Power.
Noise Filtration - Eliminates AC noise to improve picture and sound quality.
Flexible Power Cord - Wattbox™ power cords are both flexible and durable and designed for ease of installation.
Secondary Protection - Protected 3 GHz signal coax/satellite connections plus Ethernet / Telephone connections.
Flexible Mounting - Flat design for easy mounting in a Structured Wiring enclosure, on a wall, or behind a desk or TV.
IP Control - Provides control of outlets over an IP network. Cycle outlet state, turn outlets On or Off through a web browser.
Auto Reboot - Monitors network activity and resets power to outlets when programmable conditions are met.
Outlet Control Scheduling - Configure outlets to turn Off or On at a specific date or time.
System Notifications - Programmable email notifications keep you informed of System Status Changes.
WELCOME TO WATTBOX
WattBox
power products are designed specifically to provide customers with advanced protection for their valuable electronics and
™
Custom Integrators with maximum flexibility for installation. With this IP-enabled power conditioner, both service calls and system
downtime are reduced, and the self-healing Auto Reboot feature automatically resets components that become unresponsive on the
network. Plus you get a host of remote access features to monitor and control individual outlets – even receive email notifications that
keep you informed about the system's status.
Rest assured that WattBox
products will deliver the protection and safety for your customers' needs. All WattBox
™
UL certified and built with the highest quality components available, such as Fireproof MOVs. Whether in a rack, a structured wiring
enclosure, or behind a flat screen, the versatile mounting options offer simple installation of WattBox
cords, adapters and signal cables.
WattBox
is the ideal choice for Custom Integrators who demand reliability, safety, and flexibility when installing power products for
™
their valued customers.
© 2012 Wattbox
™
™
PROTECTED
GROUNDED
CONTROLLED 1
CONTROLLED 2
™
OWNERS MANUAL
WB-200-IPCE-3
products are
™
for easily managing power
™
pg.1

Advertisement

Table of Contents
loading

Related Manuals for watt box WB-200-IPCE-3

Summary of Contents for watt box WB-200-IPCE-3

  • Page 1 ™ OWNERS MANUAL WB-200-IPCE-3 PROTECTED GROUNDED CONTROLLED 1 CONTROLLED 2 KEY FEATURES Surge Protection with Fireproof MOVs - Advanced Ceramic MOV technology reduces risk of fire from surges. Surge Disconnect - In the event of a catastrophic surge event, this Wattbox™ component will sacrifice itself and permanently disconnect AC Power.

  • Page 2: Package Contents

    WATTBOX™ WB-200-IPCE-3 Installation and Users Manual PACKAGE CONTENTS (1) Owner’s Manual (1) WB-200-2 or WB-200-CE-4 (1) Power Cord (1) DVD Rom Containing Support Documents and WattBox™ Utility Software (4) Rubber Feet (4) Mounting Screws, Anchors and Washers (1) Sheets of Power Cord Labels (8 total labels)

  • Page 3: Led Operation

    WATTBOX™ WB-200-IPCE-3 Installation and Users Manual LED OPERATION Green (Solid): All sites/IP Addresses are communicating with the WattBox INTERNET WB-400-IPCE-8 At least 1 (not all) Sites/IP Addresses are communicating with the Green (Flashing): WattBox SYSTEM STATUS POWER Red (Solid): None of the Sites/IP Addresses are communicating with the WattBox.
  • Page 4 WATTBOX™ WB-200-IPCE-3 Installation and Users Manual WALL / CABINET MOUNTING 1. Locate wall studs using a stud finder (not included). 2. Position the provided template on the wall in the desired location of the Wattbox™. If the location does not allow for this, use a wall molly or anchor with the appropriate weight rating for the Wattbox™.
  • Page 5 Surveillance DVR After connecting the WB-200-IPCE-3 to the network, configuration for IP control is performed using the WattBox Utility. The utility and documentation on configuring the WattBox can be found on the included CD Rom and the SnapAV website (www.snapav.com).

  • Page 6: Important Safety Instructions

    WATTBOX™ WB-200-IPCE-3 Installation and Users Manual IMPORTANT SAFETY INSTRUCTIONS Read and observe the following safety points at all times. WARNING – Power Sources Do not plug this Component into a power outlet that differs from the source indicated for safe use on the Component. If you don’t know the type of electrical power that is supplied to your home, consult your local power company or a qualified electrician.

  • Page 7: Troubleshooting

    WATTBOX™ WB-200-IPCE-3 Installation and Users Manual TROUBLESHOOTING Symptom Possible Cause Remedy • Wattbox is not receiving power. Wattbox is not turned On. Turn Wattbox switch on. ™ ™ ™ Make sure AC power plug is plugged into a properly grounded 120 volts (nominal) wall outlet.

  • Page 8: Specifications

    WATTBOX™ WB-200-IPCE-3 Installation and Users Manual SPECIFICATIONS Outlets NEMA 5-15 Type Number of Outlets Switched AC Power 120V, 60Hz Line Voltage IEC C-14 AC Input Connection Power Cord Length Breaker/Switch Rating UL Current Rating 500V Voltage Protection Rating (UL 1449 3rd Edition)

  • Page 9: Warranty

    WATTBOX™ WB-200-IPCE-3 Installation and Users Manual WARRANTY SnapAV Surge Protector Lifetime Product Warranty SnapAV warrants to the purchaser of any standard SnapAV surge protector that the surge protector shall be free of defects in design, material, or workmanship, and SnapAV will repair or replace any defective unit. For product replacement, see “NOTIFICATION” below.

  • Page 10: Contacting Technical Support

    WATTBOX™ WB-200-IPCE-3 Installation and Users Manual 4. DETERMINATION OF FAILURE: SnapAV will evaluate the protector for surge damage. The protector must show signs of surge damage or must be performing outside of design specifications relative to its surge protection capability. Opening the enclosure, tampering with, or modifying the unit in any way shall be grounds for an automatic denial of your request for payment.
  • Page 12 121101-0900 © 2012 Wattbox ™...

Table of Contents