Connecting - Linn AKURATE Loudspeaker System Owner's Manual

AKURATE 221
English

Connecting

Connect the AKURATE 221 speaker to a mains supply using the mains lead
provided.
IMPORTANT:
Do not turn on the mains supply until you have connected all other
components.
Connecting to a Linn System Controller or other
AV processor
FROM LINN SYSTEM CONTROLLER
OR OTHER AV PROCESSOR
Connecting to a stereo pre-amplifier
frequency response) speakers, for example AKURATE 242 or 212 speakers.
AKURATE Loudspeaker System
Owner's Manual
HP OUT
AL OUT
A IN
if used with large (full-range
HP OUT
AL OUT
A IN
FROM STEREO PRE-AMP
Connecting to a stereo pre-amplifier and power amplifier
with 'small' (limited bass response) speakers.
TO POWER AMPLIFIER
FROM STEREO PRE-AMP
Note:
In the above configuration the AKURATE 221 speaker is being used to stop
low bass notes from being sent to the main speakers.
Connecting to another AKURATE 221 speaker
AKURATE 221 - ONE
HP OUT
AL OUT
A IN
FROM LINN SYSTEM
OR
CONTROLLER
OR OTHER
AKURATE 221 - TWO AV PROCESSOR
HP OUT
AL OUT
A IN
10
if used
HP OUT
AL OUT
A IN
AKURATE 221 - ONE
HP OUT
AL OUT
A IN
FROM FROM
STEREO
STEREO
PRE-AMP
PRE-AMP
AKURATE 221 - TWO
HP OUT
AL OUT
A IN