Cantonk All HD-SDI User Manual

Safety Instruction
Thank you for purchasing this HD CCTV Camera. Please read these
instructions carefully for a thorough understanding of how the cameras
operates.
1.Operating requirements
1.1 Before using the camera ,please read this manual carefully and keep it
safely for later use.
1.2 Installation should be proceed by professional service and follow
manufacturer's instructions, do not dismantle without authorization.
1.3 In order to prevent sensor ,do not expose lens to intense light source in
long time.
1.4 Do not touch sensor directly. Please covers the dustproof cover when the
camera is not being used.
1.5 Please use a dry soft cloth to clean the camera. If dirt difficult to clean,
use detergent with water and wipe dry the camera.
1.6 Do not install camera under air conditioning's air gate ,or else lens blur
with condensation of moisture.
1.7 Please ensure that all electric power sources are turned off when not
open , installation ,clean, etc operation.
1.8 Please transporting , using and storing the camera in allowable
temperature and humidity.
1.9 If the camera was broken, for example power cord or plug
damaged ,splash liquid
raining ,wetting ,etc can't work situation ,please contact manufacturer or
maintenance center (modify and maintenance without permission ,you
must be responsible for the problems)
2.Statement
2.1 All photos here are for reference only .Specifications are subject to
physical product.
2.2 This manual is subject to change without further notice.
2.3 Please contact with customer service for the newest procedures and
supplementary specification.
2.4 This manual list several model numbers for reference , please user
according actual product to operating.
2.5 We will do the best to keep this manual complete and accurate, but some
data may has deviation. If any doubt or dispute ,company retain the final
right of the product.
Feature
■ ACCE ( Adaptive Color & Contrast Enhancement)
■ NTSC/PAL Selectable
■ DC Lens/ RS485
Specification
Imaging Sensor
Scanning System
S/N Ratio
Video Output Mode
Video Output Level
HD-SDI /1.0 Vp-p (75Ω，Composite)
Lens
Min. Illumination
IR Distance
OSD
Electronic Shutter
AGC
2D/3D-NR
Digital Zoom/PIP
D-DFFECT
Freeze/Mirror/D-Zoom/NEG.IMAGE
Voltage/Current
Operating temperature
Dimension (mm)
Weight (g)
or foreign matter fall
1/3" 2.1Megapixel CMOS
Progressive Scan
More than 50dB (AGC Off)
1080P(1920 X 1080)
2.8-12mm Manual Zoom Lens
1.0Lux(Color),0.5Lux(BW)
40M(with ￠5X42PCS LED)
Built-in
Auto/FLK/1/25,30sec ~ 1/50000sec
Low/Middle/High
2DNR/3DNR/SMART NR
On/Off(x2 ~ x8)
DC12V+10% / 800mA
-10°~ +50°C
306(W)X97(H)X110(D)mm
1600
INTRODUCTION:
This camera which has 2.1M Pixes is specially designed for security monitoring. It
applies the latest 2.1M Pixes progressive scan CMOS. It is a heavyweight new-
designed HD camera which applied DC12V and support user customize the output
into camera,
parameter settings.

Packing List

NO.
1
2
3
1
Wire ports
Application method
3
HD CCTV CAMERA

USER MANUAL

Name Model
Camera All HD-SDI
Power line
—
Warranty
—
Card
Number
1
1
1
2
4