Chapter 4: Using The Console Interface For Configuration; Overview; Configuring The Hyperterminal Application; Figure 4-1: Finding Hyperterminal - Linksys SRW2016 User Manual

16- or 24-Port 10/100/1000 Gigabit Switch with WebView

Chapter 4: Using the Console Interface for Configuration

Overview

The Switch features a menu-driven console interface for basic configuration of the Switch and management of
your network. Before you can use the console interface, you will need to configure the HyperTerminal application
on your PC.

Configuring the HyperTerminal Application

1. Click the Start button. Select Programs and then Accessories. Select Communications. HyperTerminal
should be one of the options listed in this menu. Select HyperTerminal.
2. On the Connection Description screen, enter a name for this connection. In the example, the name of
connection is SRW2016. Select an icon for the application. Then click OK.
3. On the Connect To screen, select a port to communicate with the Switch, COM1, COM2, or TCP/IP.
Chapter 4: Using the Console Interface for Configuration
Overview

Figure 4-1: Finding HyperTerminal

Figure 4-2: Connection Description

Figure 4-3: Connect To

9