Gas/Oil Mixing Chart; Installation Instructions - RCGF 20cc SBM Operator's Manual

------------------------

GAS/OIL Mixing Chart

1 Gallon Gasoline (128 fl oz/3.78L) / 2-Cycle Oil
(4.26fl oz/125.68ml) = 30:1 ratio
● Excessive running of the engine at idle speed can result in a seriously carbonized
spark plug.
● Keep the surface of the engine clean to ensure proper heat dissipation. Ensure proper
cooling/ventilation around the cylinder with adequate air exhaust.
● To avoid permanent damage to the electronic ignition system, never rotate the propeller
on your RCGF engine with the electronic ignition system switched on and the plug not
installed in the plug cap.
------------------------

Installation Instructions

Prepare the engine for installation
Before beginning installation it's a good idea to plan location of the various components
of the engine. Many of the following steps may need to be completed in a different order
than listed.
1. Check to see that all screws and bolts are tight. Check carefully for any cracks, broken,
or missing parts. Tighten or replace any damaged or missing parts before proceeding.