Using Peripheralvision; To Configure The Ip Router X4; Ip Router Page - Ringdale PeripheralVision User Manual

Using PeripheralVision

11.22.33.44
IP Address
TCP/IP Subnet Mask
6
®
to Configure the IP Router
Full operational procedures for PeripheralVision
are dealt with in the Help file which can be
accessed from the program, refer to this if any
problems are encountered in the procedure
detailed below.
Install PeripheralVision
One. Using the Locate NPMP
PeripheralVision
address (11.22.33.44). The IP router will appear
on the network map, it will be an icon similar to
the example on the left.
Left click twice on the icon to open up the property
Pages of the device. Using the arrows in the top
right corner, scroll the pages and click on the first
IP Router page. This is shown below.
The following information needs to be entered
onto this page (this will be supplied by your
network administrator).
Enter here the router's IP address for Network 1.
Enter here the subnet mask for Network 1.
®
onto a PC on Network
TM
discovery tool in
® , enter the default set IP
®