Sony Cyber-shot DSC-T70 Instruction Manual page 138

Using your Macintosh computer
98
You can copy images to your Macintosh
computer.
• "Picture Motion Browser" is not compatible
with Macintosh computers.
The following environment is
recommended for a computer connected to
the camera.
Recommended environment for copying
images
os
(pre-installed):
Mac OS
9.119.2/
Mac
OS X(vIO.1 to vIOA)
USB jack:
Provided as standard
Recommended environment for using
"Music Transfer"
OS (pre-installed):
Mac OS X (v 10.3 to
v
I 004)
CPU:
iMac, eMac, iBook, PowerBook, Power
Mac G3/G4/G5 series, Mac mini
Memory:
64 MB or more (128 MB or more is
recommended)
Hard Disk:
Disk space required for
installation-approximately
250
MB
Notes on connecting the camera to a
computer
• Operations are not guaranteed for all the
recommended computer environments
mentioned above.
• If you connect two or more USB devices to a
single computer at the same time, some devices,
including the camera, may not operate
depending on the types of USB devices you are
usmg.
• Operations are not guaranteed when using a
USB hub.
• Connecting the camera using a USB interface
that is compatible with Hi-Speed USB (USB 2.0
compliant) allows advanced transfer (high speed
transfer) as the camera is compatible with Hi-
Speed USB (USB 2.0 compliant).
• There are three modes for a USB connection
when connecting a computer, [Auto] (default
setting), [Mass Storage] and [PictBridge]
modes. This section describes the [Autol and
[Mass Storage] as examples. For details on
[PictBridge], see page 73.
• When your computer resumes from the suspend
or sleep mode, communication between the
camera and your computer may not recover at
the same time.
1
Prepare the camera and a
Macintosh computer.
Perform the same procedure as
described in "Preparing the camera and
the computer" on page 90.
2
Connect the camera to your
computer with the cable for multi-
use terminal.
Perform the same procedure as
described in "Connecting the camera to
your computer" on page 90.
3
Copy image files to the Macintosh
computer.
G)Double-click the newly recognized icon
- [DCIM] - the folder where the
images you want to copy are stored.
®
Drag and drop the image files to the
hard disk icon.
The image files are copied to the hard
disk.
• For details on the storage location of the
images and file names, see page 92.