Advertisement
LISTENING MODE SETUP
Dialogue (Enhanced Dialogue Clarity)
Stereo (Normal)
WideSound (Expanded Soundstage)
WideSound Plus (Expanded Soundstage with Enhanced Dialogue Clarity)
How to Activate Various Listening Modes
I.
Press the "MODE" button on the remote control once to activate the display and cycle through the four listening modes.
◀
II. Use the
on the remote control to toggle between the different listening modes sources (WideSound
Dialogue).
Note: WideSound
TM
(Expanded Soundstage) is the factory default when powered on.
STANDBY
With the corresponding end of the mains power cord connected to the AC mains input of the VS21 and the plug connected to a mains power source,
press "ON" on the remote control to turn on the VS21 from standby mode. The front panel power indicator will turn from Amber to Blue. Press "OFF" on
the remote control to return to standby.
AUTO STANDBY
The VS21 will automatically go to standby mode if there is no user interface interaction and no active source input within 20 minutes.
Coax, Optical and Analogue Sources
I.
With a coaxial, optical or analogue source selected, the VS21 will automatically go to standby mode and lower the power consumption to
<0.5W, if there is no user interface interaction and no active source input within 20 minutes.
II. Front panel power indicator will change from Blue to Amber to indicate this.
III. To wake up the VS21, press "ON" on the remote control.
8
TM
, WideSound
TM
Plus, Stereo,
Advertisement
