Arlec RC10 Instructions For Use

waRRantY
Arlec guarantees this product in accordance with the Australian Consumer Law.
Arlec also warrants to the original first purchaser of this product ("you") from a retailer that
this product will be free of defects in materials and workmanship for a period of 12 months
from the date of purchase; provided the product is not used other than for the purpose, or in
a manner not within the scope of the recommendations and limitations, specified by Arlec,
is new and not damaged at the time of purchase, has not been subjected to abuse, misuse,
neglect or damage, has not been modified or repaired without the approval of Arlec and has
not been used for commercial purposes ("Warranty").
If you wish to claim on the Warranty, you must, at your own expense, return the product, and
provide proof of original purchase and your name, address and telephone number, to Arlec
at the address below or the retailer from whom you originally purchased the product within
12 months from the date of purchase.
Arlec will (or authorise the retailer to) assess any claim you may make on the Warranty in
the above manner and if, in Arlec's reasonable opinion, the Warranty applies, Arlec will at its
own option and expense (or authorise the retailer to) replace the product with the same or
similar product or repair the product and return it to you or refund the price you paid for the
product. Arlec will bear its own expenses of doing those things, and you must bear any other
expenses of claiming on the Warranty.
The Warranty is in addition to other rights and remedies you may have under a law in relation
to the product to which the Warranty relates.
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and for compensation for
any other reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
Arlec Australia Pty. Ltd. ACN 009 322 105 ("Arlec") gives the Warranty.
Arlec's telephone number, address and email address are:
Customer Service: (03) 9982 5111
New Zealand toll Free: 0800 003 329
Building 3, 31 – 41 Joseph Street, Blackburn North, Victoria, 3130
Blackburn North LPO, P.O. Box 1065, Blackburn North, 3130
Email: custservice@arlec.com.au
ENERGY SAVING
ReMote ContRol
POWER OUTLET
tuRn applianCes
on and off with
wiReless ReMote
ContRol
RC10 (one soCket supplied)
RC13 (thRee soCkets supplied)
ImPORTANT! Please read these instructions carefully.
CPIN002937
130mmL x 200mmD
siMple and easY
to setup - no wiRing
RequiRed
instRuCtions foR use
intRoduCtion
The remote control power switch
consists of a remote control and plug-in
wall socket unit.
Once set up, the remote control can be
used to send wireless signals to activate
any appliance plugged in to the wall
socket unit.
Since the operating range is up to 30 metres,
you can plug the wall socket almost
anywhere in your home, office or garage
and control any electrical appliance from
a distance.
Note: The transmission range of the
wireless signal may be reduced if the signal
is transmitted through a number of walls,
ceilings or other objects. Metallic obstructions
in particular may have a large effect.
ReMote
ContRol unit
The remote control
is operated by two
button batteries,
type LR44 (or AG13
or equivalent alkaline
type), batteries are
supplied in the pack.
CPIN002937
RC10/RC13