Download
Share
Print this page
Lilin PIH-800III Instruction Manual
  1. Manuals
  2. Brands
  3. Lilin Manuals
  4. Control Unit
  5. PIH-800III
  6. Instruction manual

Lilin PIH-800III Instruction Manual

Keyboard controller
Hide thumbs

Advertisement

Quick Links

Keyboard Controller
PIH-800III
INSTRUCTION MANUAL

Advertisement

loading

Summary of Contents for Lilin PIH-800III

  • Page 1 Keyboard Controller PIH-800III INSTRUCTION MANUAL...
  • Page 2 CAUTION The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the RISK OF ELECTRIC SHOCK presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT OPEN COVER.

  • Page 3: Table Of Contents

    PREFACE Thank you for choosing PIH-800III keyboard. For trouble free installation and optimum performance please read this manual thoroughly before attempting installation or operation. CONTENTS Page 1. Introduction 2. Specifications 3. Keyboard Layout 4. Matrix and Receiver Operation 5. Fast Speed Dome Operation 6.

  • Page 4: Introduction

    1. INTRODUCTION The PIH-800III is a control keyboard For a rage of matrix switchers, dome cameras and telemetry receivers. It allows operation of all the functions of that equipment an provides an simple operator interface. When matrix is present in the system, up to 8 keyboards can be used ,howeve,r one keyboard must always be configured as the Master, having greater access to settings than the slaves.

  • Page 5: Matrix And Receiver Operation

    4. MATRIX AND RECEIVER OPERATION Function Keys F1 Turns on or off the on-screen display.(time,date monitor and camera number) F2 Displays the log of last 10 camera or video loss alarms. F3 Adjust the position of the on-screen display. F4 Sets the P/T/Z preset position groups. Joystick Controls the movement of pan and tilt cameras.
  • Page 6 SETUP Key Enters Matrix Setup Mode. MON Key Selects a particular monitor. CAM Key Selects a particular camera. CLR Key Selects a particular camera. ENT Key Used to enter or confirm data and programming. PRESET Key For recalling and storing preset positions. PRESET 1 / 2 / 3 / 4 Keys These Keys instantly move the selected camera to relevant preset position 1-4 ZOOM IN / ZOOM OUT Keys...

  • Page 7: Fast Speed Dome Operation

    5. FAST DOME CAMERA OPERATION Numeric Keys 0~9 for entering camera, monitor numbers ets. Function Keys F1 To set the speed that Fast Dome Camera travels between preset positions. F2 To set the dwell time of preset position. F3 To store the preset data F4 To set the preset groups Joystick Controls the movement and speed of the dome.

  • Page 8: Wiring Diagrams

    PRESET 1 / 2 / 3 / 4 Keys These Keys instantly move the selected camera to the relevant preset position 1-4. ZOOM IN / ZOOM OUT Keys Manually controls the zoom lens. FOCUS FAR / FOCUS NEAR Keys Manually adjusts the focus of the lens. AUTO FOCUS Key Auto Focus control key when connects to Fast Dome Camera.

  • Page 9: Dip Switch Setting

    MLP1 VERSION MLP1 (MERIT LILIN PROTOCOL 1) is same as PIH-717 Fast Dome Protocol. MLP2 (MERIT LILIN PROTOCOL 2) is the new protocol for controlling fast dome cameras. The protocol contains 7 bytes which include a check-sum byte and extra control codes.
  • Page 10 Matrix 6 Setting ON Dip Switch 1, 2, 3 Master & Slave Setting DIP SWITCH 1st Keyboard 2nd Keyboard 3rd Keyboard 4th Keyboard 5th Keyboard 6th Keyboard 7th Keyboard 8th Keyboard Key Sound Dip Switch 4 Key Sound Setting Beep Silent Alarm Buzzer Dip Switch 5 Alarm Buzzer Setting...
  • Page 11 MERIT LILIN ENT. CO., LTD http://www.meritlilin.com 66-800IIICSE...