Figure 5-2: Connecting To An Access Point; Figure 5-3: Confirm Wireless Settings; Figure 5-4: Cannot Find Wireless Network; Figure 5-5: Choose An Access Point - Linksys Network Router How To Use Manual

Wireless-G Range Expander
3. The next screen advises you to have your PC communicating with your wireless network before starting the
setup process. The Range Expander does not yet require connection. You should always connect your
networking gear to a surge protector. Click the Next button to continue or Exit to exit the Setup Wizard.
4. The Setup Wizard will run a search for your wireless network. If found, you will be asked to
confirm the settings. If you confirm them,
access point for the Range Expander to communicate with,
wireless network is found, click Continue
point will be displayed.
a.A screen will notify you when no access point is detected on your network. Click
Continue to survey your network for any access points or wireless routers or Cancel to
exit the Setup Wizard.
b.The site survey results will display all available access points and wireless routers in your network.
Select the one to which you wish to connect from the list shown. Then, click Yes to continue or No to
return to the beginning of the Setup Wizard.
Chapter 5: Setting Up the Wireless-G Range Expander
proceed to Step 5
. If you'd like to chose a different
continue to Step 4b
and a list with the status information for each access
below. If no
Figure 5-3: Confirm
Wireless Settings

Figure 5-2: Connecting to an access point

Figure 5-4: Cannot find
Wireless Network

Figure 5-5: Choose an access point

11