1. Manuals
  2. Brands
  3. IUI Design Manuals
  4. Portable Speakers
  5. IMMERSE UD-1404
  6. User manual

IUI Design IMMERSE UD-1404 User Manual

2.1 wi-fi / bluetooth multi-room sound bar with wireless subwoofer
Hide thumbs Also See for IMMERSE UD-1404:
Table of Contents

Advertisement

Quick Links

IMMERSE
UD-1404
2.1 Wi-Fi / Bluetooth Multi-Room Sound Bar with Wireless Subwoofer
User Manual
* Please read the instructions carefully before using the system and keep the manual for future reference.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IMMERSE UD-1404 and is the answer not in the manual?

Questions and answers

Related Manuals for IUI Design IMMERSE UD-1404

Summary of Contents for IUI Design IMMERSE UD-1404

  • Page 1 IMMERSE UD-1404 2.1 Wi-Fi / Bluetooth Multi-Room Sound Bar with Wireless Subwoofer User Manual * Please read the instructions carefully before using the system and keep the manual for future reference.

  • Page 3: Table Of Contents

    Table of Content Inside the Box Precautions Product Introduction Overview Soundbar Subwoofer Remote Control Setup of IMMERSE Placement Connecting to your TV Connect to DVD player Connecting to other devices Wi-Fi Advanced setting Reset Wi-Fi Connection Bluetooth Ethernet Aux-in / Analog / Optical / Coaxial Multi-Room Whole House Operation Sound Effect Mode Firmware Updating...

  • Page 4: Inside The Box

    Inside the Box Carefully unpack the carton and confirm that the following parts are included. IMMERSE Wi-Fi / Bluetooth sound bar • Subwoofer • Remote control • AC adaptors • Installation screws • Manual • 3.5A Inside the Box...

  • Page 5: Precautions

    Precautions * Please read these safety instructions carefully to ensure your safety. Do not use this product where contact with moisture, liquids, humidity or rain is possible to avoid • electric shock and operating damage. Avoid exposing this product to direct sunlight, stove tops or any other heat sources to prevent •...
  • Page 6 Connect the equipment into an outlet on a circuit different from that to which the receiver is • connected. Consult the dealer or an experienced radio / TV technician for help. • FCC Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.

  • Page 7: Product Introduction

    The iui DESIGN UD-1404 “IMMERSE” multi-room 2.1 sound bar is a breakthrough in providing high performance audio to your TV and also your entire home. You’re in control – you can use sound bar with other iui DESIGN Wi-Fi speakers to create a whole-house system, and the configuration options are almost limitless.
  • Page 8 You can use the app to connect the IMMERSE to your home network, you can name it (Living Room, Bedroom, Den), and you can assign IMMERSE and other iui DESIGN Wi-Fi speakers to groups, so that you can play your music to one, some or all Wi-Fi speakers and sound bar.

  • Page 9: Overview

    Overview Sound Bar Front: 1. POWER – Switch the soundbar and subwoofer on or to standby. 2. SOURCE – Select an input source for the soundbar. 3. MFB – Activate Bluetooth pairing mode in Bluetooth mode and Resetting in Wi-Fi mode. 4.

  • Page 10: Subwoofer

    Subwoofer 1. Power – Switch the subwoofer on or off. 2. DC jack – Connect with power source. 3. Pairing button – Activate soundbar and subwoofer pairing mode. Remote 1. Power – Switch the soundbar on or to standby. 2. Wi-Fi mode – Select Wi-Fi as an input source. 3.

  • Page 11: Setup Of Immerse

    Setup of IMMERSE The IMMERSE sound bar transmits sound signal from audio source to the subwoofer by 2.4GHz wireless technology for reliable connection. Connect Sound bar to Subwoofer When the sound bar and subwoofer are connected to power source and powered on, they connect automatically and the LED on subwoofer turns solid red.
  • Page 12 Press the pairing button on the Press the “SUB” button on the sound subwoofer until LED flashing. bar touch panel until LED on sound bar panel flashing with alert tone. The SUB LED on sound bar and the LED on subwoofer are flashing which indicate that they are establishing a connection.

  • Page 13: Placement

    “table top”. For better sound experience, the sound bar should be placed at or close to ear level. Option 1: Tabletop Simply place IMMERSE on a flat surface horizontally with the iui DESIGN logo facing the listener. The rubber feet on IMMERSE will cushion it on the flat surface.

  • Page 14: Connecting To Your Tv

    Connecting to your TV Subwoofer The subwoofer should be placed flat surface, preferably on the floor. For stable connection with the soundbar, place it within 3 meters or 9 feet from the soundbar. Connect to TV In order to finish setting up the IMMERSE system, you should connect it to a TV using analog or optical/coaxial audio input.

  • Page 15: Connect To Dvd Player

    Connect to DVD player After you finish setting up the IMMERSE system, it can connect to a DVD player using analog, optical or coaxial audio input. Connect the soundbar and the DVD player with a RCA cable / a digital optical cable / coaxial cable.

  • Page 16: Connecting To Other Devices

    Connecting to other devices After you finish setting up the IMMERSE system, it can connect to other devices, such as smartphones, tablets, PCs, video game consoles, etc. using the following connection options. Please note that the sound bar system will enter standby mode when there is no any source connected to the sound bar in 20minutes.
  • Page 17 IMMERSE will be located. Otherwise, an error message will appear after entering password as the app cannot detect IMMERSE in the current Wi-Fi network. Setup for Android / iOS user Download the free iui DESIGN Wi-Fi Audio App from Google Play or App Store. Wi-Fi - Connecting to other devices...
  • Page 18 Settings Wi-Fi Wi-Fi CHOOSE A NETWORK IMMERSExxxx NETWORK_ROUTER Open the Wi-Fi setting page on your Select “WIFI/LAN” as the audio device. Turn on the Wi-Fi feature and source. select “IMMERSExxxx”* from the list of available wireless networks*. Launch the app on your device. Select your Wi-Fi network inside the Press button to start the...
  • Page 19 IMMERSE_LivingRoom Enter password for your Wi-Fi Rename IMMERSE and tap network you chose . The LED to confirm. indicator turns to solid red. * If the IMMERSE could not be found in the list, follow the section “Reset Wi-Fi Connection” to reset the speaker to factory default and try again. In case of incorrect password or failed connection, follow the section “Reset Wi-Fi Connection”...
  • Page 20 Setup for PC / Mac user Select “WIFI/LAN” as the audio source. Connect IMMERSE to your PC / Mac using Wi-Fi / RJ45 Ethernet cable. Use an Ethernet cable to connect Search and connect IMMERSE and your device. It takes “IMMERSExxxx”...
  • Page 21 Browse the below link on your Select “Connect to Home” > device to enter the setup page: “Wireless” in the setup page. http://192.168.6.1/ Select your Wi-Fi network. Enter password for your Wi-Fi network you chose and Click “Join”. Wi-Fi - Connecting to other devices...
  • Page 22 Click “Done” and remove the Ethernet cable if you use it for setup * If the IMMERSE could not be found in the list, follow the section “Reset Wi-Fi Connection” to reset the speaker to factory default and try again. In case of incorrect password or failed connection, follow the section “Reset Wi-Fi Connection”...
  • Page 23 Streaming Music via Wi-Fi Connection For Android User You should download a DLNA compatible player for streaming music. Select IMMERSE (which may appear with the name you assigned) as your audio output device in the music player. Different players may have different setups, please refer to those corresponding user guides for detail.
  • Page 24 For PC User Windows Media Player Ver.11 and above can be used to stream music to IMMERSE through "Play To" feature. Use "Play To" on your music library from Windows Media Player. For detail instruction for "Play To" feature, please consult the user manual for your specific device.

  • Page 25: Advanced Setting

    Advanced Setting Using the iui DESIGN Wi-Fi Audio App, you can control the advanced setting of IMMERSE and other iui DESIGN Wi-Fi speakers, including “Rename Your Speaker”, “Multi-Room”, “Audio Channel” and “Firmware Update”. For multi-room setting, see the section “Multi-Room” for detailed instructions.
  • Page 26 Bluetooth - Connecting to other devices After you finish setting up the IMMERSE system, it can stream music wirelessly from a Bluetooth enabled device by Bluetooth pairing or NFC (for NFC enabled devices only). By Pairing - Bluetooth Connection Select “BT” as the audio source. Press and hold button on remote control to activate pairing mode.
  • Page 27 Turn on the Bluetooth feature on Search “IMMERSE” and select. your device Confirm pairing and the BT LED indicator turns solid red. Bluetooth - Connecting to other devices...
  • Page 28 By NFC - Bluetooth Connection - for NFC enabled device only Select “BT” as the audio source. Turn on the NFC feature on your device. Tap on the NFC sensor for pairing. Confirm pairing and the BT LED indicator turns solid red. Bluetooth - Connecting to other devices...
  • Page 29 Ethernet - Connecting to other devices After you finish setting up the IMMERSE system, it can stream music wirelessly from a digital music source through Wi-Fi connection while the IMMERSE system is physically connected with the Wi-Fi router. Before Setup Please prepare a RJ45 Ethernet cable and a PC / Mac which has Wi-Fi feature for setup.
  • Page 30 Browse the below link on your Select “Connect to Home” > device to enter the setup page: “LAN” in the setup page. http://192.168.6.1/ Click “Join”. Use an Ethernet cable to connect the soundbar and your Wi-Fi router. Ethernet - Connecting to other devices...
  • Page 31 Click “Done”. The WIFI LED indicator lights up once the connection is completed. * If the IMMERSE could not be found in the list, follow the section “Reset Wi-Fi Connection” to reset the speaker to factory default and try again. Ethernet - Connecting to other devices...
  • Page 32 “Wi-Fi - Connect to other devices” for detailed instructions. Advanced Setting Using the iui DESIGN Wi-Fi Audio App, you can control the advanced setting of IMMERSE and other iui DESIGN Wi-Fi speakers, including “Rename Your Speaker”, “Multi-Room”, “Audio Channel” and “Firmware Update”.
  • Page 33 Aux-in / Analog / Optical / Coaxial - Connecting to other devices After you finish setting up the IMMERSE system, it can connect to an audio source using aux-in, analog, optical or coaxial audio input. Connect the soundbar and the audio source with a 3.5mm audio line-in cable / a RCA cable / a digital optical cable / a coaxial cable as shown below.

  • Page 34: Multi-Room Whole House Operation

    This feature only can be used in Wi-Fi or Ethernet connection and with iui DESIGN Wi-Fi Audio App, In the iui DESIGN Wi-Fi Audio App, follow the below steps for multi-room setup.

  • Page 35: Sound Effect Mode

    Sound Effect Mode There are 3 pre-set sound effect modes in IMMERSE: Music mode, Movie mode and 3D mode. Different modes have different audio equalizer setting. You can choose the mode that fits your usage. 3D mode Movie mode Music mode Sound Effect Mode...

  • Page 36: Firmware Updating

    “Firmware Update” allows updating the firmware of IMMERSE maintain the best product performance. It is strongly recommended that you always update your firmware, and regularly check to see if an update is available. For Android / iOS User In the iui DESIGN app, the sign means EVERYWHERE_Bathoom EVERYWHERE_Bathoom EVERYWHERE_Kitchen there is update available.
  • Page 37 For PC User Connect your PC to the Wi-Fi Open “Your Neighborhood network where IMMERSE is Network”. located. Double click IMMERSE to Click “Others…” . enter setup page. Firmware Updating...
  • Page 38 Click “Firmware Upgrade”. Click “Check for Update”. Click “Update” if there is available update. * Please keep stable network connection during firmware upgrade. Firmware Updating...
  • Page 39 For Mac User Connect your Mac to the Wi-Fi Open “Safari”. network where IMMERSE is Select “Preferences…” in Safari located. toolbar. Click “Advanced” and check Select “Bonjour > Webpages > the box for “Include Bonjour IMMERSE” to enter setup page. in the Favorites bar”.
  • Page 40 Click “Others…” . Click “Firmware Upgrade”. * Please keep stable network connection during firmware upgrade. Click “Check for Update”. Click “Update” if there is available update. Firmware Updating...

  • Page 41: Troubleshooting

    Trouble Shooting What is Multi-room Wi-Fi audio? Multi-room Wi-Fi audio means leveraging a Wi-Fi network and use the Wi-Fi • connected speaker system to fill every space at home with extraordinary sound by using multiple speakers. What should be the router type to use with IMMERSE? Please use 802.11 b/g/n compatible router.
  • Page 42 Is it possible to connect IMMERSE with Wi-Fi home network and Bluetooth of smartphone simultaneously? Each IMMERSE cannot connect with Wi-Fi and Bluetooth simultaneously • but either one of them. As long as the Wi-Fi and Bluetooth connection is being established in IMMERSE, it will look for the last connected device (Bluetooth or Wi-Fi) when turn on.
  • Page 43 © 2015 IUI Audio Inc. (United States) or Platform2 International Limited (other countries). All rights reserved. The iui DESIGN brand, logo and other marks under iui DESIGN are owned and registered by IUI Audio Inc. (United States) or Platform2 International Limited (other countries). The Bluetooth word mark ®...

Table of Contents