Ematic SOUNDPOWER User Manual

Speaker Basics
User's Manual
Rugged Life Speaker
SOUNDPOWER
Charging
Answer Call / End Call
Connect the speaker with the USB cable to a
Play / Pause
computer or charging port. The indicator light
Volume Down / Back
will flash red while charging, and will turn off
Volume Up / Next
Indicator Light
when charging is complete.
Safety & Precautions
• Always store the speaker with the power
off and in a clean, dust-free environment.
MicroUSB Port
3.5mm audio jack Power On / Off
• Avoid storing the speaker in extreme
temperatures that may affect battery life
and speaker performance.
Pairing with Your Device
1. Turn on the speaker to enter Bluetooth mode.
2. The indicator light will flash blue to indicate
the speaker is in Bluetooth mode.
Charging Charging
3. Turn on Bluetooth on your device. Search for
the device "Ematic SoundPower" and tap to
connect. When the speaker and your device
are paired, the speaker will chime.
4. You may have to enter a password on some
devices with an older version of Bluetooth.
Enter "0000" as the password and confirm it.
Using an AUX Cable
When the speaker is connected to an AUX
cable, the indicator light will alternately flash
green and blue. Playback is also controlled by
the audio player.
Bluetooth mode
Playback & Phone Controls
Hold to turn down the volume.
Press twice to go to the previous track.
Press to answer a call or hold to reject.
Press to play or pause.
Hold to turn up the volume.
Press twice to go to the next track.