Table of Contents
Advertisement
Network Camera User's Guide
When enabled, the device will attempt to configure port mapping in a NAT router on your
network, using UPnP™. Note that UPnP™ must be enabled in the NAT router first.
Port Range:
The port range will open in NAT router.
External IP address:
Show the IP address and port for WAN access through Internet. If NAT traversal is
configured successfully, user can use this IP address and port to access this device. The
external IP address is not shown in case NAT traversal function is failed.
Bonjour
Bonjour, also known as zero-configuration networking, enables automatic discovery of
computers, devices, and services on IP networks. Bonjour uses industry standard IP
protocols to allow devices to automatically discover each other without the need to enter
IP addresses or configure DNS servers. Specifically, Bonjour enables automatic IP
address assignment without a DHCP server, name to address translation without a DNS
server, and service discovery without a directory server. Bonjour is an open protocol
which Apple has submitted to the IETF as part of the ongoing standards-creation
process.
Bonjour:
To enable or disable the Bonjour service here.
42/99
Advertisement
Table of Contents
